final class NegZDouble extends AnyVal

An AnyVal for non-positive Doubles.

Because NegZDouble is an AnyVal it will usually be as efficient as an Double, being boxed only when a Double would have been boxed.

The NegZDouble.apply factory method is implemented in terms of a macro that checks literals for validity at compile time. Calling NegZDouble.apply with a literal Double value will either produce a valid NegZDouble instance at run time or an error at compile time. Here's an example:

scala> import anyvals._
import anyvals._

scala> NegZDouble(-1.1)
res1: org.scalactic.anyvals.NegZDouble = NegZDouble(-1.1)

scala> NegZDouble(1.1)
<console>:14: error: NegZDouble.apply can only be invoked on a non-positive (i <= 0.0) floating point literal, like NegZDouble(-1.1).
              NegZDouble(1.1)
                       ^

NegZDouble.apply cannot be used if the value being passed is a variable (i.e., not a literal), because the macro cannot determine the validity of variables at compile time (just literals). If you try to pass a variable to NegZDouble.apply, you'll get a compiler error that suggests you use a different factor method, NegZDouble.from, instead:

scala> val x = -1.1
x: Double = -1.1

scala> NegZDouble(x)
<console>:15: error: NegZDouble.apply can only be invoked on a floating point literal, like NegZDouble(-1.1). Please use NegZDouble.from instead.
              NegZDouble(x)
                       ^

The NegZDouble.from factory method will inspect the value at runtime and return an Option[NegZDouble]. If the value is valid, NegZDouble.from will return a Some[NegZDouble], else it will return a None. Here's an example:

scala> NegZDouble.from(x)
res4: Option[org.scalactic.anyvals.NegZDouble] = Some(NegZDouble(-1.1))

scala> val y = 1.1
y: Double = 1.1

scala> NegZDouble.from(y)
res5: Option[org.scalactic.anyvals.NegZDouble] = None

The NegZDouble.apply factory method is marked implicit, so that you can pass literal Doubles into methods that require NegZDouble, and get the same compile-time checking you get when calling NegZDouble.apply explicitly. Here's an example:

scala> def invert(pos: NegZDouble): Double = Double.MaxValue - pos
invert: (pos: org.scalactic.anyvals.NegZDouble)Double

scala> invert(1.1)
res6: Double = 1.7976931348623157E308

scala> invert(Double.MaxValue)
res8: Double = 0.0

scala> invert(1.1)
<console>:15: error: NegZDouble.apply can only be invoked on a non-positive (i <= 0.0) floating point literal, like NegZDouble(-1.1).
              invert(1.1)
                     ^

This example also demonstrates that the NegZDouble companion object also defines implicit widening conversions when a similar conversion is provided in Scala. This makes it convenient to use a NegZDouble where a Double is needed. An example is the subtraction in the body of the invert method defined above, Double.MaxValue - pos. Although Double.MaxValue is a Double, which has no - method that takes a NegZDouble (the type of pos), you can still subtract pos, because the NegZDouble will be implicitly widened to Double.

Source
NegZDouble.scala
Linear Supertypes
AnyVal, Any
Ordering
  1. Alphabetic
  2. By Inheritance
Inherited
  1. NegZDouble
  2. AnyVal
  3. Any
  1. Hide All
  2. Show All
Visibility
  1. Public
  2. Protected

Value Members

  1. final def !=(arg0: Any): Boolean
    Definition Classes
    Any
  2. final def ##(): Int
    Definition Classes
    Any
  3. def %(x: Double): Double

    Returns the remainder of the division of this value by x.

  4. def %(x: Float): Double

    Returns the remainder of the division of this value by x.

  5. def %(x: Long): Double

    Returns the remainder of the division of this value by x.

  6. def %(x: Int): Double

    Returns the remainder of the division of this value by x.

  7. def %(x: Char): Double

    Returns the remainder of the division of this value by x.

  8. def %(x: Short): Double

    Returns the remainder of the division of this value by x.

  9. def %(x: Byte): Double

    Returns the remainder of the division of this value by x.

  10. def *(x: Double): Double

    Returns the product of this value and x.

  11. def *(x: Float): Double

    Returns the product of this value and x.

  12. def *(x: Long): Double

    Returns the product of this value and x.

  13. def *(x: Int): Double

    Returns the product of this value and x.

  14. def *(x: Char): Double

    Returns the product of this value and x.

  15. def *(x: Short): Double

    Returns the product of this value and x.

  16. def *(x: Byte): Double

    Returns the product of this value and x.

  17. def +(x: Double): Double

    Returns the sum of this value and x.

  18. def +(x: Float): Double

    Returns the sum of this value and x.

  19. def +(x: Long): Double

    Returns the sum of this value and x.

  20. def +(x: Int): Double

    Returns the sum of this value and x.

  21. def +(x: Char): Double

    Returns the sum of this value and x.

  22. def +(x: Short): Double

    Returns the sum of this value and x.

  23. def +(x: Byte): Double

    Returns the sum of this value and x.

  24. def +(x: String): String

    Converts this NegZDouble's value to a string then concatenates the given string.

  25. def -(x: Double): Double

    Returns the difference of this value and x.

  26. def -(x: Float): Double

    Returns the difference of this value and x.

  27. def -(x: Long): Double

    Returns the difference of this value and x.

  28. def -(x: Int): Double

    Returns the difference of this value and x.

  29. def -(x: Char): Double

    Returns the difference of this value and x.

  30. def -(x: Short): Double

    Returns the difference of this value and x.

  31. def -(x: Byte): Double

    Returns the difference of this value and x.

  32. def /(x: Double): Double

    Returns the quotient of this value and x.

  33. def /(x: Float): Double

    Returns the quotient of this value and x.

  34. def /(x: Long): Double

    Returns the quotient of this value and x.

  35. def /(x: Int): Double

    Returns the quotient of this value and x.

  36. def /(x: Char): Double

    Returns the quotient of this value and x.

  37. def /(x: Short): Double

    Returns the quotient of this value and x.

  38. def /(x: Byte): Double

    Returns the quotient of this value and x.

  39. def <(x: Double): Boolean

    Returns true if this value is less than x, false otherwise.

  40. def <(x: Float): Boolean

    Returns true if this value is less than x, false otherwise.

  41. def <(x: Long): Boolean

    Returns true if this value is less than x, false otherwise.

  42. def <(x: Int): Boolean

    Returns true if this value is less than x, false otherwise.

  43. def <(x: Char): Boolean

    Returns true if this value is less than x, false otherwise.

  44. def <(x: Short): Boolean

    Returns true if this value is less than x, false otherwise.

  45. def <(x: Byte): Boolean

    Returns true if this value is less than x, false otherwise.

  46. def <=(x: Double): Boolean

    Returns true if this value is less than or equal to x, false otherwise.

  47. def <=(x: Float): Boolean

    Returns true if this value is less than or equal to x, false otherwise.

  48. def <=(x: Long): Boolean

    Returns true if this value is less than or equal to x, false otherwise.

  49. def <=(x: Int): Boolean

    Returns true if this value is less than or equal to x, false otherwise.

  50. def <=(x: Char): Boolean

    Returns true if this value is less than or equal to x, false otherwise.

  51. def <=(x: Short): Boolean

    Returns true if this value is less than or equal to x, false otherwise.

  52. def <=(x: Byte): Boolean

    Returns true if this value is less than or equal to x, false otherwise.

  53. final def ==(arg0: Any): Boolean
    Definition Classes
    Any
  54. def >(x: Double): Boolean

    Returns true if this value is greater than x, false otherwise.

  55. def >(x: Float): Boolean

    Returns true if this value is greater than x, false otherwise.

  56. def >(x: Long): Boolean

    Returns true if this value is greater than x, false otherwise.

  57. def >(x: Int): Boolean

    Returns true if this value is greater than x, false otherwise.

  58. def >(x: Char): Boolean

    Returns true if this value is greater than x, false otherwise.

  59. def >(x: Short): Boolean

    Returns true if this value is greater than x, false otherwise.

  60. def >(x: Byte): Boolean

    Returns true if this value is greater than x, false otherwise.

  61. def >=(x: Double): Boolean

    Returns true if this value is greater than or equal to x, false otherwise.

  62. def >=(x: Float): Boolean

    Returns true if this value is greater than or equal to x, false otherwise.

  63. def >=(x: Long): Boolean

    Returns true if this value is greater than or equal to x, false otherwise.

  64. def >=(x: Int): Boolean

    Returns true if this value is greater than or equal to x, false otherwise.

  65. def >=(x: Char): Boolean

    Returns true if this value is greater than or equal to x, false otherwise.

  66. def >=(x: Short): Boolean

    Returns true if this value is greater than or equal to x, false otherwise.

  67. def >=(x: Byte): Boolean

    Returns true if this value is greater than or equal to x, false otherwise.

  68. final def asInstanceOf[T0]: T0
    Definition Classes
    Any
  69. def ceil: NegZDouble

    Returns the smallest (closest to 0) NegZDouble that is greater than or equal to this NegZDouble and represents a mathematical integer.

  70. def ensuringValid(f: (Double) => Double): NegZDouble

    Applies the passed Double => Double function to the underlying Double value, and if the result is positive, returns the result wrapped in a NegZDouble, else throws AssertionError.

    Applies the passed Double => Double function to the underlying Double value, and if the result is positive, returns the result wrapped in a NegZDouble, else throws AssertionError.

    This method will inspect the result of applying the given function to this NegZDouble's underlying Double value and if the result is greater than 0.0, it will return a NegZDouble representing that value. Otherwise, the Double value returned by the given function is 0.0 or negative, so this method will throw AssertionError.

    This method differs from a vanilla assert or ensuring call in that you get something you didn't already have if the assertion succeeds: a type that promises an Double is positive. With this method, you are asserting that you are convinced the result of the computation represented by applying the given function to this NegZDouble's value will not produce zero, a negative number, including Double.NegativeInfinity, or Double.NaN. Instead of producing such invalid values, this method will throw AssertionError.

    f

    the Double => Double function to apply to this NegZDouble's underlying Double value.

    returns

    the result of applying this NegZDouble's underlying Double value to to the passed function, wrapped in a NegZDouble if it is positive (else throws AssertionError).

    Exceptions thrown

    AssertionError if the result of applying this NegZDouble's underlying Double value to to the passed function is not positive.

  71. def floor: NegZDouble

    Returns the greatest (closest to infinity) NegZDouble that is less than or equal to this NegZDouble and represents a mathematical integer.

  72. def getClass(): Class[_ <: AnyVal]
    Definition Classes
    AnyVal → Any
  73. def isFinite: Boolean

    True if this NegZDouble value is any finite value (i.e., it is neither positive nor negative infinity), else false.

  74. final def isInstanceOf[T0]: Boolean
    Definition Classes
    Any
  75. def isNegInfinity: Boolean

    True if this NegZDouble value represents negative infinity, else false.

  76. def isWhole: Boolean

    Indicates whether this NegZDouble has a value that is a whole number: it is finite and it has no fraction part.

  77. def max(that: NegZDouble): NegZDouble

    Returns this if this > that or that otherwise.

  78. def min(that: NegZDouble): NegZDouble

    Returns this if this < that or that otherwise.

  79. def plus(x: NegZDouble): NegZDouble

    Returns the NegZDouble sum of this value and x.

    Returns the NegZDouble sum of this value and x.

    This method will always succeed (not throw an exception) because adding a non-positive Double to another non-positive Double will always result in another non-positive Double value (though the result may be infinity).

  80. def round: NegZLong

    Rounds this NegZDouble value to the nearest whole number value that can be expressed as an NegZLong, returning the result as a NegZLong.

  81. def toByte: Byte

    Converts this NegZDouble to a Byte.

  82. def toChar: Char

    Converts this NegZDouble to a Char.

  83. def toDegrees: Double

    Converts an angle measured in radians to an approximately equivalent angle measured in degrees.

    Converts an angle measured in radians to an approximately equivalent angle measured in degrees.

    returns

    the measurement of the angle x in degrees.

  84. def toDouble: Double

    Converts this NegZDouble to a Double.

  85. def toFloat: Float

    Converts this NegZDouble to a Float.

  86. def toInt: Int

    Converts this NegZDouble to an Int.

  87. def toLong: Long

    Converts this NegZDouble to a Long.

  88. def toRadians: Double

    Converts an angle measured in degrees to an approximately equivalent angle measured in radians.

    Converts an angle measured in degrees to an approximately equivalent angle measured in radians.

    returns

    the measurement of the angle x in radians.

  89. def toShort: Short

    Converts this NegZDouble to a Short.

  90. def toString(): String

    A string representation of this NegZDouble.

    A string representation of this NegZDouble.

    Definition Classes
    NegZDouble → Any
  91. def unary_+: NegZDouble

    Returns this value, unmodified.

  92. def unary_-: PosZDouble

    Returns the negation of this value.

  93. val value: Double

Inherited from AnyVal

Inherited from Any

Ungrouped