scalactic
Convenience base trait for string Uniformitys.
Convenience base trait for string Uniformitys.
This trait defines a normalizedCanHandle method that returns true if the passed
Any is a String and a normalizedOrSame method that
normalizes any passed Strings via the normalized method, which is
left abstract for subclasses to fill in.
Here's an example in which AbstractStringUniformity is used to normalize strings
by ensuring the first character, if any, is capitalized:
val capitalized: Uniformity[String] = new AbstractStringUniformity { def normalized(s: String): String = if (s.isEmpty) "" else s.charAt(0).toUpper + s.substring(1) }
Here's an example of using the capitalized Uniformity with a Matcher expression:
scala> import org.scalatest._
import org.scalatest._
scala> import Matchers._
import Matchers._
scala> import org.scalactic._
import org.scalactic._
scala> val capitalized: Uniformity[String] =
| new AbstractStringUniformity {
| def normalized(s: String): String =
| if (s.isEmpty) "" else s.charAt(0).toUpper + s.substring(1)
| }
capitalized: org.scalactic.Uniformity[String] = $anon$1@65601e00
scala> "Hello" should equal ("hello") (after being capitalized)
Provides mechanisms that enable errors to be accumulated in “accumulating Ors,” Ors whose
Bad type is an Every.
Provides mechanisms that enable errors to be accumulated in “accumulating Ors,” Ors whose
Bad type is an Every.
The mechanisms are:
Ors to withGood methodscombined on a container of accumulating OrsvalidatedBy on a container of any type, passing in a function from that type to an accumulating Orzip on an accumulating Orwhen on an accumulating OrFor more information and examples, see the Accumulating errors with Or section
of the main documentation for class Or.
Contains a “bad” value.
Contains a “bad” value.
You can decide what “bad” means, but it is expected Bad will be commonly used
to hold descriptions of an error (or several, accumulated errors). Some examples of possible error descriptions
are String error messages, Int error codes, Throwable exceptions,
or instances of a case class hierarchy designed to describe errors.
the “bad” value
A trait that represent a rich-featured boolean value, which includes the following members:
A trait that represent a rich-featured boolean value, which includes the following members:
Bool composableBool is used by code generated from BooleanMacro (which AssertionsMacro and RequirementsMacro uses),
it needs to be public so that the generated code can be compiled. It is expected that ScalaTest users would ever need to use Bool directly.
Abstract class used to enforce type constraints for equality checks.
Abstract class used to enforce type constraints for equality checks.
For more information on how this class is used, see the documentation of TripleEqualsSupport.
Convenience class for extractors that match and return Throwables based on a type and Boolean condition.
Convenience class for extractors that match and return Throwables based on a type and Boolean condition.
Class Catcher was motivated by the need to catch
and handle exceptions based on more than just the exception's type as a strategy for dealing with
"flickering" tests—tests that usually pass, but occasionally fail. The best strategy for dealing with
flickers is to fix the test such that they stop flickering, but sometimes that is not practical. In
such cases allowing the test to continue flickering can distract the team by requiring them to
spend time inspecting failures to determine whether or not they are flickers or real failures that need
attention. Worse, with enough flickers, team members can stop checking all failures and not notice real ones.
One strategy for dealing with flickers you can't practically fix is to catch exceptions that are causing individual flickers
and cancel the test when you detect them. Often this means you will need to insert a catch clause in a particular spot, or a pattern
match if in a withFixture, looking for a particular exception with a particular message or other identifying attribute. If
the same problem is causing flickers in many places,
it is handy to create an extractor to detect the problem. This Catcher class provides
a factory method that takes a partial function from Throwable to Boolean and produces such an extractor.
Here's an example:
val InternalServerError = Catcher { case e: DBAccessException => e.getMessage == "500:Internal Server Error" }
Using this Catcher in a ScalaTest withFixture method would look like:
override def withFixture(test: NoArgTest) = { super.withFixture(test) match { case Failed(InternalServerError(ex)) => Canceled("Canceled because likely a flicker caused by intermittently flaky DB", ex) case other => other } }
A non-empty list: an ordered, immutable, non-empty collection of elements with LinearSeq performance characteristics.
A non-empty list: an ordered, immutable, non-empty collection of elements with LinearSeq performance characteristics.
The purpose of Chain is to allow you to express in a type that a List is non-empty, thereby eliminating the
need for (and potential exception from) a run-time check for non-emptiness. For a non-empty sequence with IndexedSeq
performance, see Every.
Chains You can construct a Chain by passing one or more elements to the Chain.apply factory method:
scala> Chain(1, 2, 3) res0: org.scalactic.Chain[Int] = Chain(1, 2, 3)
Alternatively you can cons elements onto the End singleton object, similar to making a List starting with Nil:
scala> 1 :: 2 :: 3 :: Nil res0: List[Int] = List(1, 2, 3) scala> 1 :: 2 :: 3 :: End res1: org.scalactic.Chain[Int] = Chain(1, 2, 3)
Note that although Nil is a List[Nothing], End is
not a Chain[Nothing], because no empty Chain exists. (A chain is a series
of connected links; if you have no links, you have no chain.)
scala> val nil: List[Nothing] = Nil nil: List[Nothing] = List() scala> val nada: Chain[Nothing] = End <console>:16: error: type mismatch; found : org.scalactic.End.type required: org.scalactic.Chain[Nothing] val nada: Chain[Nothing] = End ^
Chains Chain does not extend Scala's Seq or Traversable traits because these require that
implementations may be empty. For example, if you invoke tail on a Seq that contains just one element,
you'll get an empty Seq:
scala> List(1).tail res6: List[Int] = List()
On the other hand, many useful methods exist on Seq that when invoked on a non-empty Seq are guaranteed
to not result in an empty Seq. For convenience, Chain defines a method corresponding to every such Seq
method. Here are some examples:
Chain(1, 2, 3).map(_ + 1) // Result: Chain(2, 3, 4) Chain(1).map(_ + 1) // Result: Chain(2) Chain(1, 2, 3).containsSlice(Chain(2, 3)) // Result: true Chain(1, 2, 3).containsSlice(Chain(3, 4)) // Result: false Chain(-1, -2, 3, 4, 5).minBy(_.abs) // Result: -1
Chain does not currently define any methods corresponding to Seq methods that could result in
an empty Seq. However, an implicit converison from Chain to List
is defined in the Chain companion object that will be applied if you attempt to call one of the missing methods. As a
result, you can invoke filter on an Chain, even though filter could result
in an empty sequence—but the result type will be List instead of Chain:
Chain(1, 2, 3).filter(_ < 10) // Result: List(1, 2, 3) Chain(1, 2, 3).filter(_ > 10) // Result: List()
You can use Chains in for expressions. The result will be an Chain unless
you use a filter (an if clause). Because filters are desugared to invocations of filter, the
result type will switch to a List at that point. Here are some examples:
scala> import org.scalactic._
import org.scalactic._
scala> for (i <- Chain(1, 2, 3)) yield i + 1
res0: org.scalactic.Chain[Int] = Chain(2, 3, 4)
scala> for (i <- Chain(1, 2, 3) if i < 10) yield i + 1
res1: List[Int] = List(2, 3, 4)
scala> for {
| i <- Chain(1, 2, 3)
| j <- Chain('a', 'b', 'c')
| } yield (i, j)
res3: org.scalactic.Chain[(Int, Char)] =
Chain((1,a), (1,b), (1,c), (2,a), (2,b), (2,c), (3,a), (3,b), (3,c))
scala> for {
| i <- Chain(1, 2, 3) if i < 10
| j <- Chain('a', 'b', 'c')
| } yield (i, j)
res6: List[(Int, Char)] =
List((1,a), (1,b), (1,c), (2,a), (2,b), (2,c), (3,a), (3,b), (3,c))
the type of elements contained in this Chain
Defines a custom way to determine equality for a type when compared with another value of type Any.
Defines a custom way to determine equality for a type when compared with another value of type Any.
Equality enables you to define alternate notions of equality for types that can be used
with ScalaUtil's === and !== syntax and ScalaTest's matcher syntax.
For example, say you have a case class that includes a Double value:
scala> case class Person(name: String, age: Double) defined class Person
Imagine you are calculating the age values in such as way that occasionally tests
are failing because of rounding differences that you actually don't care about. For example, you
expect an age of 29.0, but you're sometimes seeing 29.0001:
scala> import org.scalactic._
import org.scalactic._
scala> import TripleEquals._
import TripleEquals._
scala> Person("Joe", 29.0001) === Person("Joe", 29.0)
res0: Boolean = false
The === operator looks for an implicit Equality[L], where L is the left-hand type: in this
case, Person. Because you didn't specifically provide an implicit Equality[Person], === will fall back on
default equality, which will call Person's equals method. That equals method, provided by the Scala compiler
because Person is a case class, will declare these two objects unequal because 29.001 does not exactly equal 29.0.
To make the equality check more forgiving, you could define an implicit Equality[Person] that compares
the age Doubles with a tolerance, like this:
scala> import Tolerance._
import Tolerance._
scala> implicit val personEq =
| new Equality[Person] {
| def areEqual(a: Person, b: Any): Boolean =
| b match {
| case p: Person => a.name == p.name && a.age === p.age +- 0.0002
| case _ => false
| }
| }
personEq: org.scalactic.Equality[Person] = $anon$1@2b29f6e7
Now the === operator will use your more forgiving Equality[Person] for the equality check instead
of default equality:
scala> Person("Joe", 29.0001) === Person("Joe", 29.0)
res1: Boolean = true
Scalactic defines a default Equality[T] for all types T whose areEqual method works by first
calling .deep on any passed array, then calling == on the left-hand object, passing in the right-hand object.
You can obtain a default equality via the default method of the Equality companion object,
or from the defaultEquality method defined in TripleEqualsSupport.
The Equality trait represents the Java Platform's native notion of equality, as expressed in the signature and contract of
the equals method of java.lang.Object. Essentially, trait Equality enables you to write alternate
equals method implementations for a type outside its defining class.
In an equals method, the left-hand type is known to be the type of this, but
the right-hand type is Any.
As a result, you would normally perform a runtime type test to determine whether the right-hand object is of an appropriate type for equality,
and if so, compare it structurally for equality with the left-hand (this) object.
An an illustration, here's a possible equals
implementation for the Person case class shown in the earlier example:
override def equals(other: Any): Boolean = other match { case p: Person => name = p.name && age = p.age case _ => false }
The areEquals method of Equality[T] is similar. The left-hand type is known to be T, but the right-hand type is Any, so
normally you'd need to do a runtime type test in your areEqual implementation.
Here's the areEqual method implementation from the earlier Equality[Person] example:
def areEqual(a: Person, b: Any): Boolean = b match { case p: Person => a.name == p.name && a.age === p.age +- 0.0002 case _ => false }
Equality is used by TripleEquals, which enforces no type constraint between the left and right values, and the
equal, be, and contain syntax of ScalaTest Matchers.
By contrast, TypeCheckedTripleEquals
and ConversionCheckedTripleEquals use an Equivalence.
Equivalence differs from Equality in that both the left and right values are of the same type. Equivalence works for
TypeCheckedTripleEquals because the type constraint enforces that the left type is a subtype or supertype of (or the same type as) the right
type, and it widens the subtype to the supertype. So ultimately, both left and right sides are of the supertype type. Similarly, Equivalence
works for ConversionCheckedTripleEquals because the type constraint enforces that an implicit conversion
exists from either the left type to the right type, or the right type to the left type, and it always converts one
type to the other using the implicit conversion. (If both types are the same type, the identity implicit conversion
from Predef is used.) Because of the conversion, both left and right sides are ultimately of the
converted-to type. Here's an example of how writing an Equivalence's areEquivalent
method might look:
def areEquivalent(a: Person, b: Person): Boolean = a.name == b.name && a.age === b.age +- 0.0002
Scalactic provides both Equality and Equivalence because the Any in
Equality can sometimes make things painful. For example, in trait
TolerantNumerics,
a single generic factory method can produce Equivalences for any Numeric type,
but because of the Any, a separate factory method must be defined to produce an Equality
for each Numeric type.
If you just want to customize the notion of equality for ===
used in Boolean expressions, you can work with Equivalences instead of Equalitys.
If you do chose to write the more general Equalitys, they can be used wherever an Equivalence
is required, because Equality extends Equivalence, defining a final implementation of
areEquivalent that invokes areEqual.
Note: The Equality type class was inspired in part by the Equal type class of the
scalaz project.
the type whose equality is being customized
Defines a custom way to determine equality for a type when compared with another value of the same type.
Defines a custom way to determine equality for a type when compared with another value of the same type.
Equivalence enables you to define alternate notions of equality for types that can be used
with ScalaUtil's TypeCheckedTripleEquals and
ConversionCheckedTripleEquals
traits. These traits can be used to perform equality comparisons with type constraints enforced at
compile time using ScalaUtil's === and !== syntax
and ScalaTest's should === syntax of Matchers trait.
Because Equality extends Equivalence, you automatically
define an Equivalence[T] when you define an Equality[T]. Most often you will usually
want to define custom Equalitys, because they will be more generally useful: they are also
used by Scalactic's TripleEquals trait and ScalaTest's
equal, be, and contain matcher syntax. However, if you really want
just an Equivalence, and writing an Equality is inconvenient, you can write
an Equivalence directly for a type.
For example, say you have a case class that includes a Double value:
scala> case class Person(name: String, age: Double) defined class Person
Imagine you are calculating the age values in such as way that occasionally tests
are failing because of rounding differences that you actually don't care about. For example, you
expect an age of 29.0, but you're sometimes seeing 29.0001:
scala> import org.scalactic._
import org.scalactic._
scala> import TypeCheckedTripleEquals._
import TypeCheckedTripleEquals._
scala> Person("Joe", 29.0001) === Person("Joe", 29.0)
res0: Boolean = false
The === operator of TypeCheckedTripleEquals looks for an implicit
Equivalence[SUPER], where SUPER is either the left-hand or right-hand type, whichever
one is a supertype of the other. In this case, both sides are Person (which is considered a supertype of
itself), so the compiler will look for an Equivalence[Person].
Because you didn't specifically provide an implicit Equivalence[Person], === will fall back on
default equality, because an Equality[Person] is-an
Equivalence[Person]. The default Equality[Person] will call Person's
equals method. That equals method, provided by the Scala compiler
because Person is a case class, will declare these two objects unequal because 29.001 does not
exactly equal 29.0.
To make the equality check more forgiving, you could define an implicit Equivalence[Person] that compares
the age Doubles with a tolerance, like this:
scala> import Tolerance._
import Tolerance._
scala> implicit val personEq =
| new Equivalence[Person] {
| def areEquivalent(a: Person, b: Person): Boolean =
| a.name == b.name && a.age === b.age +- 0.0002
| }
personEq: org.scalactic.Equivalence[Person] = $anon$1@7892bd8
Now the === operator will use your more forgiving Equivalence[Person] for the
equality check instead of default equality:
scala> Person("Joe", 29.0001) === Person("Joe", 29.0)
res1: Boolean = true
Type alias for String.
Type alias for String.
An ordered, immutable, non-empty collection of elements.
An ordered, immutable, non-empty collection of elements.
Class Every has two and only two subtypes: One and Many.
A One contains exactly one element. A Many contains two or more elements. Thus no way exists for an
Every to contain zero elements.
Everys You can construct an Every by passing one or more elements to the Every.apply factory method:
Every(1) Every(1, 2) Every(1, 2, 3)
Alternatively you can pass one element to the One.apply factory method, or two or more elements to
Many.apply:
One(1) Many(1, 3) Many(1, 2, 3)
Everys Every does not extend Scala's Seq or Traversable traits because these require that
implementations may be empty. For example, if you invoke tail on a Seq that contains just one element,
you'll get an empty Seq:
scala> List(1).tail res6: List[Int] = List()
On the other hand, many useful methods exist on Seq that when invoked on a non-empty Seq are guaranteed
to not result in an empty Seq. For convenience, Every defines a method corresponding to every such Seq
method. Here are some examples:
Many(1, 2, 3).map(_ + 1) // Result: Many(2, 3, 4) One(1).map(_ + 1) // Result: One(2) Every(1, 2, 3).containsSlice(Every(2, 3)) // Result: true Every(1, 2, 3).containsSlice(Every(3, 4)) // Result: false Every(-1, -2, 3, 4, 5).minBy(_.abs) // Result: -1
Every does not currently define any methods corresponding to Seq methods that could result in
an empty Seq. However, an implicit converison from Every to collection.immutable.IndexedSeq
is defined in the Every companion object that will be applied if you attempt to call one of the missing methods. As a
result, you can invoke filter on an Every, even though filter could result
in an empty sequence—but the result type will be collection.immutable.IndexedSeq instead of Every:
Every(1, 2, 3).filter(_ < 10) // Result: Vector(1, 2, 3) Every(1, 2, 3).filter(_ > 10) // Result: Vector()
You can use Everys in for expressions. The result will be an Every unless
you use a filter (an if clause). Because filters are desugared to invocations of filter, the
result type will switch to a collection.immutable.IndexedSeq at that point. Here are some examples:
scala> import org.scalactic._
import org.scalactic._
scala> for (i <- Every(1, 2, 3)) yield i + 1
res0: org.scalactic.Every[Int] = Many(2, 3, 4)
scala> for (i <- Every(1, 2, 3) if i < 10) yield i + 1
res1: scala.collection.immutable.IndexedSeq[Int] = Vector(2, 3, 4)
scala> for {
| i <- Every(1, 2, 3)
| j <- Every('a', 'b', 'c')
| } yield (i, j)
res3: org.scalactic.Every[(Int, Char)] =
Many((1,a), (1,b), (1,c), (2,a), (2,b), (2,c), (3,a), (3,b), (3,c))
scala> for {
| i <- Every(1, 2, 3) if i < 10
| j <- Every('a', 'b', 'c')
| } yield (i, j)
res6: scala.collection.immutable.IndexedSeq[(Int, Char)] =
Vector((1,a), (1,b), (1,c), (2,a), (2,b), (2,c), (3,a), (3,b), (3,c))
Everys Although Every is a general-purpose, non-empty ordered collection, it was motivated by the desire to enable easy
accumulation of errors in Ors. For examples of Every used in that use case, see the
Accumulating errors with Or section in the main documentation for Or.
the type of elements contained in this Every
Provides ScalaTest's “explicitly DSL,” which facilitates the
explicit specification of an Equality[T] or a Uniformity[T] where
Equality[T] is taken implicitly.
Provides ScalaTest's “explicitly DSL,” which facilitates the
explicit specification of an Equality[T] or a Uniformity[T] where
Equality[T] is taken implicitly.
The Explicitly DSL can be used with the === and !== operators of Scalactic
as well as the should equal, be, contain, and
=== syntax of ScalaTest matchers.
If you want to customize equality for a type in general, you would likely want to place an
implicit Equality[T] for that type in scope (or in T's companion object). That implicit
equality definition will then be picked
up and used when that type is compared for equality with the equal, be, and
contain matchers in ScalaTest tests and with
=== in both tests and production code.
If you just want to use a custom equality for a single comparison, however, you may prefer to pass it explicitly. For
example, if you have an implicit
Equality[String] in scope, you can force a comparison to use the default equality with this syntax:
// In production code: if ((result === "hello")(decided by defaultEquality)) true else false // In tests: result should equal ("hello") (decided by defaultEquality)
The explicitly DSL also provides support for specifying a one-off equality that is based on a normalization. For
example, Scalactic offers a StringNormalizations trait that
provides methods such as trimmed and lowerCased that return
Normalization[String] instances that normalize by trimming and lower-casing, respectively. If you bring
those into scope by mixing in or importing the members of StringNormalizations, you could use the
explicitly DSL like this:
// In production code: if ((result === "hello")(after being lowerCased)) true else false // In tests: result should equal ("hello") (after being lowerCased and trimmed)
If you prefer not to use English-like DSLs in your production code, you can alternatively
not use the Explicitly trait and instead write:
// To explicitly specify an Equality instance, just specify it: if ((result === "hello")(Equality.default)) true else false // To base an Equality instance on a Uniformity, just // call toEquality on it: if ((result === "hello")(lowerCased.toEquality)) true else false
Indicates a validation failed, describing the failure with a contained error value.
Indicates a validation failed, describing the failure with a contained error value.
the type of value describing a validation failure for this Fail
an error value describing the validation failure
Trait providing an implicit class that adds a validating method to
Future, which takes one or more validation functions and returns either the
same Future if either the Future had already failed or its value
passes all the functions, or ValidationFailedException containing an error message
describing the first validation that failed.
Trait providing an implicit class that adds a validating method to
Future, which takes one or more validation functions and returns either the
same Future if either the Future had already failed or its value
passes all the functions, or ValidationFailedException containing an error message
describing the first validation that failed.
Here's an example validation method, which passes if the given Int is evenly
divisible by 10 (i.e., the result will be Pass). If the value does not pass
this test, the result is a Fail containing a helpful error message string.
scala> import org.scalactic._
import org.scalactic._
scala> import FutureSugar._
import org.scalactic.FutureSugar._
scala> import scala.concurrent.Future
import scala.concurrent.Future
scala> import scala.concurrent.ExecutionContext.Implicits.global
import scala.concurrent.ExecutionContext.Implicits.global
scala> def isRound(i: Int): Validation[ErrorMessage] =
| if (i % 10 == 0) Pass else Fail(i + " was not a round number")
isRound: (i: Int)org.scalactic.Validation[org.scalactic.ErrorMessage]
Validation will be attempted on a successful Try. If the validation succeeds, the
resulting Future will be the same successful Future with the same value. (A
"validation" only transforms the Future if the validation fails, otherwise it is the
same Future. The only difference is its value has now been proven valid.)
In the following example, a successful Future[Int] with the value 100
passes the validation (which checks whether 100 is evenly divisible by 10), therefore
the result of the validating call is the same successful Future
with the same value.
scala> val fut100 = Future(100) fut100: scala.concurrent.Future[Int] = scala.concurrent.impl.Promise$DefaultPromise@67f9c9c6 scala> fut100.value res0: Option[scala.util.Try[Int]] = Some(Success(100)) scala> val round100 = fut100.validating(isRound) round100: scala.concurrent.Future[Int] = scala.concurrent.impl.Promise$DefaultPromise@1ac2f0d1 scala> round100.value res1: Option[scala.util.Try[Int]] = Some(Success(100))
If validation fails, the successful Future will be transformed into a failed one, with
a ValidationFailedException that contains the error message
returned by the validation function. In the following example, 42 fails the validation because it
is not evenly divisible by 10:
scala> val fut42 = Future(42) fut42: scala.concurrent.Future[Int] = scala.concurrent.impl.Promise$DefaultPromise@19c6e4d1 scala> fut42.value res2: Option[scala.util.Try[Int]] = Some(Success(42)) scala> val round42 = fut42.validating(isRound) round42: scala.concurrent.Future[Int] = scala.concurrent.impl.Promise$DefaultPromise@b5175d scala> round42.value res3: Option[scala.util.Try[Int]] = Some(Failure(org.scalactic.exceptions.ValidationFailedException: 42 was not a round number))
If validating is called on a failed Future, it just returns the same failed Future:
scala> val futEx = Future[Int] { throw new Exception("oops!") }
futEx: scala.concurrent.Future[Int] = scala.concurrent.impl.Promise$DefaultPromise@3ba0299c
scala> futEx.value
res4: Option[scala.util.Try[Int]] = Some(Failure(java.lang.Exception: oops!))
scala> val roundEx = futEx.validating(isRound)
roundEx: scala.concurrent.Future[Int] = scala.concurrent.impl.Promise$DefaultPromise@22bf1acf
scala> roundEx.value
res5: Option[scala.util.Try[Int]] = Some(Failure(java.lang.Exception: oops!))
The validating method accepts one or more validation functions. If you
pass more than one, they will be tried in order up until the first failure, whose
error message will appear in the ValidationFailedException. In other words,
validating will short circuit at the first error and return that. It
will not accumulate errors. For example, the following validation will short circuit
after the isDivBy3 function fails:
scala> def isDivBy3(i: Int): Validation[ErrorMessage] =
| if (i % 3 == 0) Pass else Fail(i + " was not divisible by 3")
isDivBy3: (i: Int)org.scalactic.Validation[org.scalactic.ErrorMessage]
scala> def isAnswerToLifeTheUniverseAndEverything(i: Int): Validation[ErrorMessage] =
| if (i == 42) Pass else Fail(i + " did not equal 42")
isAnswerToLifeTheUniverseAndEverything: (i: Int)org.scalactic.Validation[org.scalactic.ErrorMessage]
scala> val futShort = fut100.validating(isRound, isDivBy3, isAnswerToLifeTheUniverseAndEverything)
futShort: scala.concurrent.Future[Int] = scala.concurrent.impl.Promise$DefaultPromise@30bb943e
scala> futShort.value
res11: Option[scala.util.Try[Int]] = Some(Failure(org.scalactic.exceptions.ValidationFailedException: 100 was not divisible by 3))
Contains a “good” value.
Contains a “good” value.
You can decide what “good” means, but it is expected Good will be commonly used
to hold valid results for processes that may fail with an error instead of producing a valid result.
the “good” value
Provides an implicit conversion that will be applied only if a higher-priority implicit conversion declared a subtrait is not applicable.
Provides an implicit conversion that will be applied only if a higher-priority implicit conversion declared a subtrait is not applicable.
The purpose of this trait is to make the === operator symetric. In other words, a === invocation
will be allowed if subtype relationship exists in either direction. For example, in the following expression, the left hand
side is a subtype of the right hand side:
List(1, 2, 3) === Seq(1, 2, 3)
But in the next expression, it the right hand side is a subtype of the left hand side
Seq(1, 2, 3) === List(1, 2, 3)
The first expression above is enabled by the implicit conversion typeCheckedConstraint in trait
TypeCheckedTripleEquals.
The second expression above is
enabled by the implicit conversion lowPriorityTypeCheckedConstraint in this trait.
The reason these two implicit methods aren't both declared in the subtraits is that if the subtype relationship existed in both directions, they would conflict. This can happen when the exact same type is on both the left and right hand sides, because a type is a subtype of itself. By placing one of them in this supertrait, the higher priority conversion will be selected.
An Every that contains two or more elements.
An Every that contains two or more elements.
For more information and examples, see the main documentation for superclass Every.
the type of the element contained in this Many
the first element (with index 0) contained in this Many
the second element (with index 1) contained in this Many
a varargs of zero or more other elements (with index 2, 3, ...) contained in this Many
Provides an implicit method that loosens the equality constraint defined by TypeCheckedTripleEquals or ConversionCheckedTripleEquals
for Scala Maps to one that more closely matches Scala's approach to Map equality.
Provides an implicit method that loosens the equality constraint defined by TypeCheckedTripleEquals or ConversionCheckedTripleEquals
for Scala Maps to one that more closely matches Scala's approach to Map equality.
Scala's approach to Map equality is that if both objects being compared are Maps, the elements are compared to determine equality.
This means you could compare an immutable TreeMap and a mutable HashMap for equality, for instance, and get true so long as the two maps
contained the same key-value mappings. Here's an example:
scala> import scala.collection.immutable.TreeMap
import scala.collection.immutable.TreeMap
scala> import scala.collection.mutable.HashMap
import scala.collection.mutable.HashMap
scala> TreeMap("one" -> 1, "two" -> 2) == HashMap("one" -> 1, "two" -> 2)
res0: Boolean = true
Such a comparison would not, however, compile if you used === under either TypeCheckedTripleEquals or ConversionCheckedTripleEquals,
because TreeMap and HashMap are not in a subtype/supertype relationship, nor does an implicit conversion by default exist between them:
scala> import org.scalactic._
import org.scalactic._
scala> import TypeCheckedTripleEquals._
import TypeCheckedTripleEquals._
scala> TreeMap("one" -> 1, "two" -> 2) === HashMap("one" -> 1, "two" -> 2)
<console>:16: error: types scala.collection.immutable.TreeMap[String,Int] and
scala.collection.mutable.HashMap[String,Int] do not adhere to the equality constraint selected for
the === and !== operators; the missing implicit parameter is of type
org.scalactic.EqualityConstraint[scala.collection.immutable.TreeMap[String,Int],
scala.collection.mutable.HashMap[String,Int]]
TreeMap("one" -> 1, "two" -> 2) === HashMap("one" -> 1, "two" -> 2)
^
If you mix or import the implicit conversion provided by MapEqualityConstraint, however, the comparison will be allowed:
scala> import MapEqualityConstraints._
import MapEqualityConstraints._
scala> TreeMap("one" -> 1, "two" -> 2) === HashMap("one" -> 1, "two" -> 2)
res2: Boolean = true
The equality constraint provided by this trait requires that both left and right sides are subclasses of scala.collection.GenMap and that
an EqualityConstraint can be found for both key types and both value types. In the example above, both the TreeMap and
HashMap are subclasses of scala.collection.GenMap, and the regular TypeCheckedTripleEquals provides equality
constraints for the key types, both of which are String, and value types, both of which are Int. By contrast, this
trait would not allow a TreeMap[String, Int] to be compared against a HashMap[String, java.util.Date], because no equality constraint
will exist between the value types Int and Date:
scala> import java.util.Date
import java.util.Date
scala> TreeMap("one" -> 1, "two" -> 2) === HashMap("one" -> new Date, "two" -> new Date)
<console>:20: error: types scala.collection.immutable.TreeMap[String,Int] and
scala.collection.mutable.HashMap[String,java.util.Date] do not adhere to the equality constraint selected for
the === and !== operators; the missing implicit parameter is of type
org.scalactic.EqualityConstraint[scala.collection.immutable.TreeMap[String,Int],
scala.collection.mutable.HashMap[String,java.util.Date]]
TreeMap("one" -> 1, "two" -> 2) === HashMap("one" -> new Date, "two" -> new Date)
^
Provides an implicit conversion that allows norm to be invoked on any value of type
T for which an implicit Normalization[T] exists.
Provides an implicit conversion that allows norm to be invoked on any value of type
T for which an implicit Normalization[T] exists.
Here's an example:
scala> import org.scalactic._ import org.scalactic._ scala> import StringNormalizations._ import StringNormalizations._ scala> implicit val stringNormalization = lowerCased and trimmed stringNormalization: org.scalactic.Uniformity[String] = org.scalactic.Uniformity$$anon$1@19ba67ec scala> import NormMethods._ import NormMethods._ scala> val s = " There " s: String = " There " scala> "Hey " + s + "!" res5: String = Hey There ! scala> "Hey " + s.norm + "!" res6: String = Hey there!
Defines a custom way to normalize instances of a type.
Defines a custom way to normalize instances of a type.
For example, to normalize Doubles by truncating off any decimal part,
you might write:
import org.scalactic._ val truncated = new Normalization[Double] { def normalized(d: Double) = d.floor }
Given this definition you could use it with the Explicitly DSL like this:
import org.scalatest._ import Matchers._ import TypeCheckedTripleEquals._ (2.1 should === (2.0)) (after being truncated)
Note that to use a Normalization with the Explicitly DSL, you'll need to use
TypeCheckedTripleEquals.
If you're just using plain-old
TripleEquals, you'll need a Uniformity, a Normalization subclass.
If you make the truncated val implicit and import or mix in the members of NormMethods,
you can access the behavior by invoking .norm on Doubles.
implicit val doubleNormalization = truncated import NormMethods._ val d = 2.1 d.norm // returns 2.0
the type whose normalization is being defined
An Equality[A] implementation that determines the equality of two objects by normalizing
one or both objects, then comparing the results using an “after normalization” equality referenced from
the afterNormalizationEquality member.
An Equality[A] implementation that determines the equality of two objects by normalizing
one or both objects, then comparing the results using an “after normalization” equality referenced from
the afterNormalizationEquality member. By default, the afterNormalizationEquality is
an instance of Equality.default[A].
NormalizingEquality is returned by the Explicitly DSL's “after being”
syntax, using for the afterNormalizationEquality the implicit Equality in scope for the type
of Uniformity passed to being. Here's an example:
scala> import org.scalactic._ import org.scalactic._ scala> import Explicitly._ import Explicitly._ scala> import StringNormalizations._ import StringNormalizations._ scala> after being lowerCased res0: org.scalactic.NormalizingEquality[String] = ComposedNormalizingEquality(Equality.default,lowerCased)
An Equivalence[A] implementation that determines the equality of two objects by normalizing
one or both objects, then comparing the results using an “after normalization” Equivalence referenced from
the afterNormalizationEquivalence member.
An Equivalence[A] implementation that determines the equality of two objects by normalizing
one or both objects, then comparing the results using an “after normalization” Equivalence referenced from
the afterNormalizationEquivalence member. By default, the afterNormalizationEquivalence is
an instance of Equivalence.default[A].
NormalizingEquivalence is returned by the Explicitly DSL's “after being”
syntax, using for the afterNormalizationEquivalence the implicit Equivalence in scope for the type
of Normalization passed to being. Here's an example:
scala> import org.scalactic._ import org.scalactic._ scala> import Explicitly._ import Explicitly._ scala> val lowerCased: Normalization[String] = StringNormalizations.lowerCased lowerCased: org.scalactic.Normalization[String] = lowerCased scala> after being lowerCased res0: org.scalactic.NormalizingEquivalence[String] = ComposedNormalizingEquivalence(Equality.default,lowerCased)
An Every that contains exactly one element.
An Every that contains exactly one element.
For more information and examples, see the main documentation for superclass Every.
the type of the element contained in this One
the lone element contained in this One
Trait providing an implicit class that adds a toOr method to
Option, which converts Some to Good,
None to Bad.
Trait providing an implicit class that adds a toOr method to
Option, which converts Some to Good,
None to Bad.
You can use the toOr method to record information about why
a processing of nested Options resulted in None.
For example, the following for expression results in
None if either the passed optional Person is
None or else if the contained optional age is None:
scala> case class Person(name: String, age: Option[Int])
defined class Person
scala> def ageOf(person: Option[Person]) =
| for {
| per <- person
| age <- per.age
| } yield age
ageOf: (person: Option[Person])Option[Int]
scala> ageOf(Some(Person("Ralph", Some(32))))
res0: Option[Int] = Some(32)
scala> ageOf(Some(Person("Curt", None)))
res3: Option[Int] = None
scala> ageOf(None)
res2: Option[Int] = None
If you instead populate the for expression with Ors,
supplying an error message or other "bad" value to the toOr method
in case of None, you'll get an indication of which part
failed if a None is encountered:
scala> import OptionSugar._
import OptionSugar._
scala> def ageOf(person: Option[Person]) =
| for {
| per <- person toOr "no person here"
| age <- per.age toOr "ageless person"
| } yield age
ageOf: (person: Option[Person])org.scalactic.Or[Int,String]
scala> ageOf(Some(Person("Ralph", Some(32))))
res1: org.scalactic.Or[Int,String] = Good(32)
scala> ageOf(Some(Person("Curt", None)))
res2: org.scalactic.Or[Int,String] = Bad(ageless person)
scala> ageOf(None)
res3: org.scalactic.Or[Int,String] = Bad(no person here)
Represents a value that is one of two possible types, with one type being “good” and the other “bad.”
Represents a value that is one of two possible types, with one type being “good” and the other “bad.”
An Or will either be a “good” value wrapped in an instance of
Good or a “bad” value wrapped in an instance
of Bad.
Or Or differs from Scala's Either type in that
Either treats both its Left and Right alternatives in an identical manner, whereas
Or treats its two alternatives differently: it favors
Good over Bad.
Because of this, it is more convenient to work with Ors
when you prefer one alternative over the other; for example, if one alternative represents a valid result
and another represents an error.
To illustrate, imagine you want to create instances this Person class from user input strings:
case class Person(name: String, age: Int)
You might write a method that parses the name from user input string and returns an
Option[String]: None if the string is empty or blank, else the
trimmed string wrapped in a Some:
def parseName(input: String): Option[String] = { val trimmed = input.trim if (!trimmed.isEmpty) Some(trimmed) else None }
You might also write a method that parses the age from user input string and returns an
Option[Int]: None if either the string is not a valid integer or
it is a negative integer, else the string converted to an integer wrapped in a Some:
def parseAge(input: String): Option[Int] = { try { val age = input.trim.toInt if (age >= 0) Some(age) else None } catch { case _: NumberFormatException => None } }
With these building blocks you could write a method that parses name and age input
strings and returns either a Person, wrapped in a Some, or
None if either the name or age, or both, was invalid:
def parsePerson(inputName: String, inputAge: String): Option[Person] = for { name <- parseName(inputName) age <- parseAge(inputAge) } yield Person(name, age)
Here are some examples of invoking parsePerson:
parsePerson("Bridget Jones", "29") // Result: Some(Person(Bridget Jones,29)) parsePerson("Bridget Jones", "") // Result: None parsePerson("Bridget Jones", "-29") // Result: None parsePerson("", "") // Result: None
Now imagine you want to give an error message back if the user's input is invalid.
You might rewrite the parsing methods to return an Either instead. In this
case, the desired result is a valid name or age, which by convention should be placed
on the right of the Either. The left will be a String error
message. Here's the new parseName function, which returns an Either[String, String]:
def parseName(input: String): Either[String, String] = { val trimmed = input.trim if (!trimmed.isEmpty) Right(trimmed) else Left(s""""${input}" is not a valid name""") }
And here's the new parseAge function, which returns an Either[String, Int]:
def parseAge(input: String): Either[String, Int] = { try { val age = input.trim.toInt if (age >= 0) Right(age) else Left(s""""${age}" is not a valid age""") } catch { case _: NumberFormatException => Left(s""""${input}" is not a valid integer""") } }
The new parsePerson method will return an Either[String, Person]:
def parsePerson(inputName: String, inputAge: String): Either[String, Person] = for { name <- parseName(inputName).right age <- parseAge(inputAge).right } yield Person(name, age)
Note that Either requires you to add .right
at the end of each generator in the for expression. Although the convention is to place the
valid result on the right, you must explicitly (and repetitively) indicate that you've done so by transforming
the Either to a RightProjection by invoking .right at each step.
Given this implementation, the parsePerson method will now short-circuit at the first sign
of trouble (as it did when we used an Option), but you now get the first error message returned
in a Left. Here are some examples:
parsePerson("Bridget Jones", "29") // Result: Right(Person(Bridget Jones,29)) parsePerson("Bridget Jones", "") // Result: Left("" is not a valid integer) parsePerson("Bridget Jones", "-29") // Result: Left("-29" is not a valid age) parsePerson("", "") // Result: Left("" is not a valid name)
Either with “attitude” Because Or declares one alternative to be “good” and the other “bad,”
it is more convenient than Either in this kind of situation. One difference to note with
Or is that the Good alternative is on the left, Bad on the right.
The reason is that Or is designed to be written using infix notation, and placing the
“happy path” first is more readable. For example, instead of writing:
Or[Int, ErrorMessage]
You can write:
Int Or ErrorMessage
Here's how the parseName method might be written using an Or, where
ErrorMessage is a type alias for String declared in the org.scalactic
package object:
import org.scalactic._ def parseName(input: String): String Or ErrorMessage = { val trimmed = input.trim if (!trimmed.isEmpty) Good(trimmed) else Bad(s""""${input}" is not a valid name""") }
You can think of the String Or ErrorMessage result
type like this:
TheparseNamemethod will return a nameStringor, if the input string is not a valid name, anErrorMessage.
Here's how the parseAge method might be written:
def parseAge(input: String): Int Or ErrorMessage = { try { val age = input.trim.toInt if (age >= 0) Good(age) else Bad(s""""${age}" is not a valid age""") } catch { case _: NumberFormatException => Bad(s""""${input}" is not a valid integer""") } }
Given these implementations, here's how you'd write the parsePerson method:
def parsePerson(inputName: String, inputAge: String): Person Or ErrorMessage = for { name <- parseName(inputName) age <- parseAge(inputAge) } yield Person(name, age)
Because of Or's attitude, you need not write .good at the end of
each generator. Or will keep going so long as each step produces a Good,
short circuiting at the first sign of a Bad. Here are a few invocations of this
parsePerson method:
parsePerson("Bridget Jones", "29") // Result: Good(Person(Bridget Jones,29)) parsePerson("Bridget Jones", "") // Result: Bad("" is not a valid integer) parsePerson("Bridget Jones", "-29") // Result: Bad("-29" is not a valid age) parsePerson("", "") // Result: Bad("" is not a valid name)
Or Another difference between Or and Either is that Or enables
you to accumulate errors if the Bad type is an Every.
An Every is similar to a Seq in that it contains ordered elements, but
different from Seq in that it cannot be empty. An Every is
either a One,
which contains one and only one element, or a Many, which contains two or
more elements.
Note: an Or whose Bad type is an Every, or one of its subtypes,
is called an “accumulating Or.”
To rewrite the previous example so that errors can be accumulated, you need first to return an Every
as the Bad type. Here's how you'd change the parseName method:
def parseName(input: String): String Or One[ErrorMessage] = { val trimmed = input.trim if (!trimmed.isEmpty) Good(trimmed) else Bad(One(s""""${input}" is not a valid name""")) }
Because parseName will either return a valid name String wrapped in a
Good, or one error message, wrapped in a Bad, you would write the
Bad type as One[ErrorMessage]. The same is true for parseAge:
def parseAge(input: String): Int Or One[ErrorMessage] = { try { val age = input.trim.toInt if (age >= 0) Good(age) else Bad(One(s""""${age}" is not a valid age""")) } catch { case _: NumberFormatException => Bad(One(s""""${input}" is not a valid integer""")) } }
Because a for expression short-circuits on the first Bad encountered, you'll
need to use a different approach to write the parsePerson method. In this example, the
withGood method from trait Accumulation
will do the trick:
import Accumulation._ def parsePerson(inputName: String, inputAge: String): Person Or Every[ErrorMessage] = { val name = parseName(inputName) val age = parseAge(inputAge) withGood(name, age) { Person(_, _) } }
Trait Accumulation offers overloaded withGood methods that take 1 to
22 accumulating Ors, plus a function taking the same number of corresponding
Good values. In this example, if both name and age are
Goods, the withGood method will pass the good name String
and age Int to the Person(_, _) function, and return the resulting Person
object wrapped in a Good. If either name and age, or both,
are Bad, withGood will return the accumulated errors in a Bad.
The result of parsePerson, if Bad, will therefore contain either one or two
error messages, i.e., the result will either be a One or a Many.
As a result, the result type of parsePerson must be Person Or
Every[ErrorMessage]. Regardless of whether a Bad result contains one
or two error messages, it will contain every error message. Here's some invocations of
this accumulating version of parsePerson:
parsePerson("Bridget Jones", "29") // Result: Good(Person(Bridget Jones,29)) parsePerson("Bridget Jones", "") // Result: Bad(One("" is not a valid integer)) parsePerson("Bridget Jones", "-29") // Result: Bad(One("-29" is not a valid age)) parsePerson("", "") // Result: Bad(Many("" is not a valid name, "" is not a valid integer))
Note that in the last example, the Bad contains an error message for both name and age.
The Accumlation trait also enables other ways of accumulating errors.
combined If you have a collection of
accumulating Ors, for example, you can combine them into one Or using combined, like this:
List(parseAge("29"), parseAge("30"), parseAge("31")).combined // Result: Good(List(29, 30, 31)) List(parseAge("29"), parseAge("-30"), parseAge("31")).combined // Result: Bad(One("-30" is not a valid age)) List(parseAge("29"), parseAge("-30"), parseAge("-31")).combined // Result: Bad(Many("-30" is not a valid age, "-31" is not a valid age))
validatedBy Or if you have a collection of values and a function that transforms that type of value into an accumulating
Ors, you can validate the values using the function using validatedBy, like this:
List("29", "30", "31").validatedBy(parseAge) // Result: Good(List(29, 30, 31)) List("29", "-30", "31").validatedBy(parseAge) // Result: Bad(One("-30" is not a valid age)) List("29", "-30", "-31").validatedBy(parseAge) // Result: Bad(Many("-30" is not a valid age, "-31" is not a valid age))
zip You can also zip two accumulating Ors together. If both are Good, you'll get a
Good tuple containin both original Good values. Otherwise, you'll get a Bad
containing every error message. Here are some examples:
parseName("Dude") zip parseAge("21") // Result: Good((Dude,21)) parseName("Dude") zip parseAge("-21") // Result: Bad(One("-21" is not a valid age)) parseName("") zip parseAge("-21") // Result: Bad(Many("" is not a valid name, "-21" is not a valid age))
when In addition, given an accumlating Or, you can pass one or more validation functions to when on the Or
to submit that Or to further scrutiny. A validation function accepts a Good type and returns a Validation[E],
where E is the type in the Every in the Bad type. For an Int Or One[ErrorMessage], for example
the validation function type would be Int => Validation[ErrorMessage]. Here are a few examples:
def isRound(i: Int): Validation[ErrorMessage] = if (i % 10 == 0) Pass else Fail(i + " was not a round number") def isDivBy3(i: Int): Validation[ErrorMessage] = if (i % 3 == 0) Pass else Fail(i + " was not divisible by 3")
If the Or on which you call when is already Bad, you get the same (Bad) Or back, because
no Good value exists to pass to the valiation functions:
parseAge("-30").when(isRound, isDivBy3) // Result: Bad(One("-30" is not a valid age))
If the Or on which you call when is Good, and also passes all the validation functions (i.e., the
all return None), you again get the same Or back, but this time, a Good one:
parseAge("30").when(isRound, isDivBy3) // Result: Good(30)
If one or more of the validation functions fails, however, you'll get a Bad back contining every error. Here are some examples:
parseAge("33").when(isRound, isDivBy3) // Result: Bad(One(33 was not a round number)) parseAge("20").when(isRound, isDivBy3) // Result: Bad(One(20 was not divisible by 3)) parseAge("31").when(isRound, isDivBy3) // Result: Bad(Many(31 was not a round number, 31 was not divisible by 3))
Note that you can use when to accumulate errors in a for expression involving an accumulating Or, like this:
for (age <- parseAge("-30") when (isRound, isDivBy3)) yield age // Result: Bad(One("-30" is not a valid age)) for (age <- parseAge("30") when (isRound, isDivBy3)) yield age // Result: Good(30) for (age <- parseAge("33") when (isRound, isDivBy3)) yield age // Result: Bad(One(33 was not a round number)) for (age <- parseAge("20") when (isRound, isDivBy3)) yield age // Result: Bad(One(20 was not divisible by 3)) for (age <- parseAge("31") when (isRound, isDivBy3)) yield age // Result: Bad(Many(31 was not a round number, 31 was not divisible by 3))
Nothing Because Or has two types, but each of its two subtypes only takes a value of one or the other type, the Scala compiler will
infer Nothing for the unspecified type:
scala> Good(3)
res0: org.scalactic.Good[Int,Nothing] = Good(3)
scala> Bad("oops")
res1: org.scalactic.Bad[Nothing,String] = Bad(oops)
Often Nothing will work fine, as it will be widened as soon as the compiler encounters a more specific type.
Sometimes, however, you may need to specify it. In such situations you can use this syntax:
scala> Good(3).orBad[String]
res2: org.scalactic.Good[Int,String] = Good(3)
scala> Good[Int].orBad("oops")
res3: org.scalactic.Bad[Int,String] = Bad(oops)
If you want to specify both types, because you don't like the inferred type, you can do so like this:
scala> Good[AnyVal, String](3)
res4: org.scalactic.Good[AnyVal,String] = Good(3)
scala> Bad[Int, ErrorMessage]("oops")
res5: org.scalactic.Bad[Int,org.scalactic.ErrorMessage] = Bad(oops)
But you may find the code is clearer if you instead use a type ascription, like this:
scala> Good(3): AnyVal Or String
res6: org.scalactic.Or[AnyVal,String] = Good(3)
scala> Bad("oops"): Int Or ErrorMessage
res7: org.scalactic.Or[Int,org.scalactic.ErrorMessage] = Bad(oops)
Note: The Or hierarchy was inspired in part by the disjoint union (\/) and Validation types of
scalaz, the ProcessResult type of
Typesafe Activator, and the Result type of
ScalaKittens.
A function that given any object will produce a “pretty” string representation of that object, where “pretty” is in the eye of the implementer.
A function that given any object will produce a “pretty” string representation of that object, where “pretty” is in the eye of the implementer.
Scala's Any type declares a toString that will convert any object to a String
representation. This String representation is primarily intended for programmers, and is usually sufficient.
However, sometimes it can be helpful to provide an alternative implementation of toString for certain types.
For example, the toString implementation on String prints out the value of the String:
scala> "1".toString res0: String = 1
If the error message that resulted from comparing Int 1 with String "1"
in a ScalaTest assertion used toString, therefore, the error message would be:
1 did not equal 1
To make it quicker to figure out why the assertion failed, ScalaTest prettifies the objects involved in
the error message. The default Prettifier will place double quotes on either side of a Strings
toString result:
scala> import org.scalactic._
import org.scalactic._
scala> Prettifier.default("1")
res1: String = "1"
Thus the error message resulting from comparing Int 1 with String "1",
in a ScalaTest assertion is:
1 did not equal "1"
If you wish to prettify an object in production code, for example, to issue a profoundly clear debug message, you can use
PrettyMethods and invoke pretty. Here's an example:
scala> import PrettyMethods._ import PrettyMethods._ scala> 1.pretty res2: String = 1 scala> "1".pretty res3: String = "1"
For example, the default Prettifier, Prettifier.default, transforms:
Null to: nullUnit to: <() the Unit value>String to: "string" (the toString result surrounded by double quotes)Char to: 'c' (the toString result surrounded by single quotes)Array to: Array("1", "2", "3")scala.Some to: Some("3")scala.util.Left to: Left("3")scala.util.Right to: Right("3")scala.util.Success to: Success("3")org.scalactic.Good to: Good("3")org.scalactic.Bad to: Bad("3")org.scalactic.One to: One("3")org.scalactic.Many to: Many("1", "2", "3")scala.collection.GenTraversable to: List("1", "2", "3")java.util.Collection to: ["1", "2", "3"]java.util.Map to: {1="one", 2="two", 3="three"}For anything else, the default Prettifier returns the result of invoking toString.
Note: Prettifier is not parameterized (i.e., Prettifier[T], where T is the type
to prettify) because assertions (including matcher expressions) in ScalaTest would then need to look up Prettifiers implicitly by type. This would slow
compilation even though most (let's guess 99.9%) of the time in practice assertions do not fail, and thus 99.9% of the time no error messages need to be generated.
If no error messages are needed 99.9% of the time, no prettification is needed 99.9% of the time, so the slow down in compile time for the implicit
look ups is unlikely to be worth the benefit. Only a few types in practice usually need prettification for testing error message purposes, and those will be covered
by the default Prettifier. A future version of ScalaTest will provide a simple mechanism to replace the default Prettifier with a
custom one when a test actually fails.
Provides an implicit conversion that enables pretty to be invoked on any
object, to transform that object into a String representation.
Provides an implicit conversion that enables pretty to be invoked on any
object, to transform that object into a String representation.
Trait that contains require, and requireState, and requireNonNull methods for checking pre-conditions
that give descriptive error messages extracted via a macro.
Trait that contains require, and requireState, and requireNonNull methods for checking pre-conditions
that give descriptive error messages extracted via a macro.
These methods of trait Requirements aim to improve error messages provided when a pre-condition check fails at runtime in
production code. Although it is recommended practice to supply helpful error messages when doing pre-condition checks, often people
don't. Instead of this:
scala> val length = 5 length: Int = 5 scala> val idx = 6 idx: Int = 6 scala> require(idx >= 0 && idx <= length, "index, " + idx + ", was less than zero or greater than or equal to length, " + length) java.lang.IllegalArgumentException: requirement failed: index, 6, was less than zero or greater than or equal to length, 5 at scala.Predef$.require(Predef.scala:233) ...
People write simply:
scala> require(idx >= 0 && idx <= length) java.lang.IllegalArgumentException: requirement failed at scala.Predef$.require(Predef.scala:221) ...
Note that the detail message of the IllegalArgumentException thrown by the previous line of code is simply, "requirement failed".
Such messages often end up in a log file or bug report, where a better error message can save time in debugging the problem.
By importing the members of Requirements (or mixing in its companion trait), you'll get a more helpful error message
extracted by a macro, whether or not a clue message is provided:
scala> import org.scalactic._ import org.scalactic._ scala> import Requirements._ import Requirements._ scala> require(idx >= 0 && idx <= length) java.lang.IllegalArgumentException: 6 was greater than or equal to 0, but 6 was not less than or equal to 5 at org.scalactic.Requirements$RequirementsHelper.macroRequire(Requirements.scala:56) ... scala> require(idx >= 0 && idx <= length, "(hopefully that helps)") java.lang.IllegalArgumentException: 6 was greater than or equal to 0, but 6 was not less than or equal to 5 (hopefully that helps) at org.scalactic.Requirements$RequirementsHelper.macroRequire(Requirements.scala:56) ...
The requireState method provides identical error messages to require, but throws
IllegalStateException instead of IllegalArgumentException:
scala> val connectionOpen = false connectionOpen: Boolean = false scala> requireState(connectionOpen) java.lang.IllegalStateException: connectionOpen was false at org.scalactic.Requirements$RequirementsHelper.macroRequireState(Requirements.scala:71) ...
Thus, whereas the require methods throw the Java platform's standard exception indicating a passed argument
violated a precondition, IllegalArgumentException, the requireState methods throw the standard
exception indicating an object's method was invoked when the object was in an inappropriate state for that method,
IllegalStateException.
The requireNonNull method takes one or more variables as arguments and throws NullArgumentException
with an error messages that includes the variable names if any are null. Here's an example:
scala> val e: String = null e: String = null scala> val f: java.util.Date = null f: java.util.Date = null scala> requireNonNull(a, b, c, d, e, f) org.scalactic.exceptions.NullArgumentException: e and f were null at org.scalactic.Requirements$RequirementsHelper.macroRequireNonNull(Requirements.scala:101) ...
Although trait Requirements can help you debug problems that occur in production, bear in mind that a much
better alternative is to make it impossible for such events to occur at all. Use the type system to ensure that all
pre-conditions are met so that the compiler can find broken pre-conditions and point them out with compiler error messages.
When this is not possible or practical, however, trait Requirements is helpful.
Provides an implicit method that loosens the equality constraint defined by TypeCheckedTripleEquals or ConversionCheckedTripleEquals
for Scala Seqs to one that more closely matches Scala's approach to Seq equality.
Provides an implicit method that loosens the equality constraint defined by TypeCheckedTripleEquals or ConversionCheckedTripleEquals
for Scala Seqs to one that more closely matches Scala's approach to Seq equality.
Scala's approach to Seq equality is that if both objects being compared are Seqs, the elements are compared to determine equality.
This means you could compare an immutable Vector and a mutable ListBuffer for equality, for instance, and get true so long as the
two Seqs contained the same elements in the same order. Here's an example:
scala> import scala.collection.mutable.ListBuffer import scala.collection.mutable.ListBuffer scala> Vector(1, 2) == ListBuffer(1, 2) res0: Boolean = true
Such a comparison would not, however, compile if you used === under either TypeCheckedTripleEquals or ConversionCheckedTripleEquals,
because Vector and ListBuffer are not in a subtype/supertype relationship, nor does an implicit conversion by default exist between them:
scala> import org.scalactic._
import org.scalactic._
scala> import TypeCheckedTripleEquals._
import TypeCheckedTripleEquals._
scala> Vector(1, 2) === ListBuffer(1, 2)
<console>:16: error: types scala.collection.immutable.Vector[Int] and
scala.collection.mutable.ListBuffer[Int] do not adhere to the equality constraint selected for
the === and !== operators; the missing implicit parameter is of type
org.scalactic.EqualityConstraint[scala.collection.immutable.Vector[Int],
scala.collection.mutable.ListBuffer[Int]]
Vector(1, 2) === ListBuffer(1, 2)
^
If you mix or import the implicit conversion provided by SeqEqualityConstraint, however, the comparison will be allowed:
scala> import SeqEqualityConstraints._ import SeqEqualityConstraints._ scala> Vector(1, 2) === ListBuffer(1, 2) res2: Boolean = true
The equality constraint provided by this trait requires that both left and right sides are subclasses of scala.collection.GenSeq and that
an EqualityConstraint can be found for the element types. In the example above, both the Vector and
ListBuffer are subclasses of scala.collection.GenSeq, and the regular TypeCheckedTripleEquals provides equality
constraints for the element types, both of which are Int. By contrast, this
trait would not allow a Vector[Int] to be compared against a ListBuffer[java.util.Date], because no equality constraint
will exist between the element types Int and Date:
scala> import java.util.Date
import java.util.Date
scala> Vector(1, 2) === ListBuffer(new Date, new Date)
<console>:20: error: types scala.collection.immutable.Vector[Int] and
scala.collection.mutable.ListBuffer[java.util.Date] do not adhere to the equality constraint selected for
the === and !== operators; the missing implicit parameter is of type
org.scalactic.EqualityConstraint[scala.collection.immutable.Vector[Int],
scala.collection.mutable.ListBuffer[java.util.Date]]
Vector(1, 2) === ListBuffer(new Date, new Date)
^
Provides an implicit method that loosens the equality constraint defined by TypeCheckedTripleEquals or ConversionCheckedTripleEquals
for Scala Sets to one that more closely matches Scala's approach to Set equality.
Provides an implicit method that loosens the equality constraint defined by TypeCheckedTripleEquals or ConversionCheckedTripleEquals
for Scala Sets to one that more closely matches Scala's approach to Set equality.
Scala's approach to Set equality is that if both objects being compared are Sets, the elements are compared to determine equality.
This means you could compare an immutable TreeSet and a mutable HashSet for equality, for instance, and get true so long as the
two Sets contained the same elements in the same order. Here's an example:
scala> import scala.collection.immutable.TreeSet import scala.collection.immutable.TreeSet scala> import scala.collection.mutable.HashSet import scala.collection.mutable.HashSet scala> TreeSet(1, 2) == HashSet(1, 2) res0: Boolean = true
Such a comparison would not, however, compile if you used === under either TypeCheckedTripleEquals or ConversionCheckedTripleEquals,
because TreeSet and HashSet are not in a subtype/supertype relationship, nor does an implicit conversion by default exist between them:
scala> import org.scalactic._
import org.scalactic._
scala> import TypeCheckedTripleEquals._
import TypeCheckedTripleEquals._
scala> TreeSet(1, 2) === HashSet(1, 2)
<console>:16: error: types scala.collection.immutable.TreeSet[Int] and
scala.collection.mutable.HashSet[Int] do not adhere to the equality constraint selected for
the === and !== operators; the missing implicit parameter is of type
org.scalactic.EqualityConstraint[scala.collection.immutable.TreeSet[Int],
scala.collection.mutable.HashSet[Int]]
TreeSet(1, 2) === HashSet(1, 2)
^
If you mix or import the implicit conversion provided by SetEqualityConstraint, however, the comparison will be allowed:
scala> import SetEqualityConstraints._ import SetEqualityConstraints._ scala> TreeSet(1, 2) === HashSet(1, 2) res2: Boolean = true
The equality constraint provided by this trait requires that both left and right sides are subclasses of scala.collection.GenSet and that
an EqualityConstraint can be found for the element types. In the example above, both the TreeSet and
HashSet are subclasses of scala.collection.GenSet, and the regular TypeCheckedTripleEquals provides equality
constraints for the element types, both of which are Int. By contrast, this
trait would not allow a TreeSet[Int] to be compared against a HashSet[java.util.Date], because no equality constraint
will exist between the element types Int and Date:
scala> import java.util.Date
import java.util.Date
scala> TreeSet(1, 2) === HashSet(new Date, new Date)
<console>:20: error: types scala.collection.immutable.TreeSet[Int] and
scala.collection.mutable.HashSet[java.util.Date] do not adhere to the equality constraint selected for
the === and !== operators; the missing implicit parameter is of type
org.scalactic.EqualityConstraint[scala.collection.immutable.TreeSet[Int],
scala.collection.mutable.HashSet[java.util.Date]]
TreeSet(1, 2) === HashSet(new Date, new Date)
^
Case class that stores the name and value of a variable or expression.
Case class that stores the name and value of a variable or expression.
See the main documentation for trait Snapshots for more information and examples.
the name of the expression
the value of the expression
An IndexedSeq[Snapshot] providing toString and lines methods that
can be useful for debug and log messages about program state.
An IndexedSeq[Snapshot] providing toString and lines methods that
can be useful for debug and log messages about program state.
See the main documentation for trait Snapshots for more information and examples.
Trait that provides a snap method that takes one or more arguments and results in a
SnapshotSeq, whose toString lists the names
and values of each argument.
Trait that provides a snap method that takes one or more arguments and results in a
SnapshotSeq, whose toString lists the names
and values of each argument.
The intended use case of this trait is to help you write debug and log messages that give a "snapshot" of program state. Here's an example:
scala> import Snapshots._ import Snapshots._ scala> snap(a, b, c, d, e, f) res3: org.scalactic.SnapshotSeq = a was 1, b was 2, c was 3, d was 4, e was null, f was null
SnapshotSeq offers a lines method that places each variable name/value pair on its own line:
scala> snap(a, b, c, d, e, f).lines res4: String = a was 1 b was 2 c was 3 d was 4 e was null f was null
Or, because a SnapshotSeq is a IndexedSeq[Snapshot], you can process it just like any other Seq, for example:
scala> snap(a, b, c, d, e, f).mkString("Wow! ", ", and ", ". That's so awesome!")
res6: String = Wow! a was 1, and b was 2, and c was 3, and d was 4, and e was null, and f was null. That's so awesome!
Provides methods that produce Uniformity[String] instances for various
ways to normalize strings for equality comparisons.
Provides methods that produce Uniformity[String] instances for various
ways to normalize strings for equality comparisons.
Trait providing an implicit conversion that adds a times method to Ints that
will repeat a given side-effecting operation multiple times.
Trait providing an implicit conversion that adds a times method to Ints that
will repeat a given side-effecting operation multiple times.
Here's an example in which a friendly greeting is printed three times:
3 times println("Hello again, world!")
Running the above code would yield this output:
Hello again, world! Hello again, world! Hello again, world!
If you need to repeat a block of statements multiple times, just enclose them in parentheses, like this:
2 times { print("Hello ") print("again, ") println("world!") }
Running the above code would yield:
Hello again, world! Hello again, world!
This trait enables times to be invoked on 0 and any positive integer,
but attempting to invoke times on a negative integer will result in an IllegalArgumentException.
Trait containing an implicit conversion that adds a +- method to Numeric types, which enables
spreads to be expressed in terms of a pivot and tolerance.
Trait containing an implicit conversion that adds a +- method to Numeric types, which enables
spreads to be expressed in terms of a pivot and tolerance.
For example, the TripleEquals trait (and its type-checking siblings TypeCheckedTripleEquals and
ConversionCheckedTripleEquals) enable you to write:
a === (1.0 +- 0.1)
Provides Equality and Equivalence instances for Numeric types that
compare for equality with a given tolerance.
Provides Equality and Equivalence instances for Numeric types that
compare for equality with a given tolerance.
Here's an example:
scala> import org.scalactic._ import org.scalactic._ scala> import TripleEquals._ import TripleEquals._ scala> 2.001 === 2.0 res0: Boolean = false scala> implicit val doubleEquality = TolerantNumerics.tolerantDoubleEquality(0.01) doubleEquality: org.scalactic.Equality[Double] = org.scalactic.TolerantNumerics$$anon$1@16c2bd13 scala> 2.001 === 2.0 res1: Boolean = true
Provides three implicit methods that loosen the equality constraint defined by TypeCheckedTripleEquals
for Scala Traversables to one that more closely matches Scala's approach to Traversable equality.
Provides three implicit methods that loosen the equality constraint defined by TypeCheckedTripleEquals
for Scala Traversables to one that more closely matches Scala's approach to Traversable equality.
Scala's approach to Traversable equality is that if the objects being compared are ether both Seqs, both Sets,
or both Maps, the elements are compared to determine equality.
This means you could compare an immutable Vector and a mutable ListBuffer for equality, for instance, and get true so long as the
two Seqs contained the same elements in the same order. Here's an example:
scala> import scala.collection.mutable.ListBuffer import scala.collection.mutable.ListBuffer scala> Vector(1, 2) == ListBuffer(1, 2) res0: Boolean = true
Such a comparison would not, however, compile if you used === under TypeCheckedTripleEquals,
because Vector and ListBuffer are not in a subtype/supertype relationship:
scala> import org.scalactic._
import org.scalactic._
scala> import TypeCheckedTripleEquals._
import TypeCheckedTripleEquals._
scala> Vector(1, 2) === ListBuffer(1, 2)
<console>:16: error: types scala.collection.immutable.Vector[Int] and
scala.collection.mutable.ListBuffer[Int] do not adhere to the equality constraint selected for
the === and !== operators; the missing implicit parameter is of type
org.scalactic.CanEqual[scala.collection.immutable.Vector[Int],
scala.collection.mutable.ListBuffer[Int]]
Vector(1, 2) === ListBuffer(1, 2)
^
If you mix or import the implicit conversion provided by TraversableEqualityConstraint, however, the comparison will be allowed:
scala> import TraversableEqualityConstraints._ import TraversableEqualityConstraints._ scala> Vector(1, 2) === ListBuffer(1, 2) res2: Boolean = true
The equality constraints provided by this trait require that left and right sides are both subclasses of either scala.collection.GenSeq,
scala.collection.GenSet, or scala.collection.GenMap, and that
an CanEqual can be found for the element types for Seq and Set, or the key and value types for Maps. In
the example above, both the Vector and
ListBuffer are subclasses of scala.collection.GenSeq, and the regular TypeCheckedTripleEquals provides equality
constraints for the element types, both of which are Int. By contrast, this
trait would not allow a Vector[Int] to be compared against a ListBuffer[java.util.Date], because no equality constraint
will exist between the element types Int and Date:
scala> import java.util.Date
import java.util.Date
scala> Vector(1, 2) === ListBuffer(new Date, new Date)
<console>:20: error: types scala.collection.immutable.Vector[Int] and
scala.collection.mutable.ListBuffer[java.util.Date] do not adhere to the equality constraint selected for
the === and !== operators; the missing implicit parameter is of type
org.scalactic.CanEqual[scala.collection.immutable.Vector[Int],
scala.collection.mutable.ListBuffer[java.util.Date]]
Vector(1, 2) === ListBuffer(new Date, new Date)
^
This trait simply mixes together SeqEqualityConstraints,
SetEqualityConstraints,
and MapEqualityConstraints.
Provides === and !== operators that return Boolean, delegate the equality determination
to an Equality type class, and require no relationship between the types of the two values compared.
Provides === and !== operators that return Boolean, delegate the equality determination
to an Equality type class, and require no relationship between the types of the two values compared.
Recommended Usage:
Trait TripleEquals is useful (in both production and test code) when you need determine equality for a type of object differently than its
equals method: either you can't change the equals method, or the equals method is sensible generally, but
you are in a special situation where you need something else. You can use the SuperSafe Community Edition compiler plugin to
get a compile-time safety check of types being compared with ===. In situations where you need a stricter type check, you can use
TypeCheckedTripleEquals.
|
This trait will override or hide implicit methods defined by its sibling traits,
ConversionCheckedTripleEquals or TypeCheckedTripleEquals,
and can therefore be used to temporarily turn of type checking in a limited scope. Here's an example, in which TypeCheckedTripleEquals will
cause a compiler error:
import org.scalactic._ import TypeCheckedTripleEquals._ object Example { def cmp(a: Int, b: Long): Int = { if (a === b) 0 // This line won't compile else if (a < b) -1 else 1 } def cmp(s: String, t: String): Int = { if (s === t) 0 else if (s < t) -1 else 1 } }
Because Int and Long are not in a subtype/supertype relationship, comparing 1 and 1L in the context
of TypeCheckedTripleEquals will generate a compiler error:
Example.scala:9: error: types Int and Long do not adhere to the equality constraint selected for
the === and !== operators; they must either be in a subtype/supertype relationship, or, if
ConversionCheckedTripleEquals is in force, implicitly convertible in one direction or the other;
the missing implicit parameter is of type org.scalactic.Constraint[Int,Long]
if (a === b) 0 // This line won't compile
^
one error found
You can “turn off” the type checking locally by importing the members of TripleEquals in
a limited scope:
package org.scalactic.examples.tripleequals import org.scalactic._ import TypeCheckedTripleEquals._ object Example { def cmp(a: Int, b: Long): Int = { import TripleEquals._ if (a === b) 0 else if (a < b) -1 else 1 } def cmp(s: String, t: String): Int = { if (s === t) 0 else if (s < t) -1 else 1 } }
With the above change, the Example.scala file compiles fine. Type checking is turned off only inside the first cmp method that
takes an Int and a Long. TypeCheckedTripleEquals is still enforcing its type constraint, for example, for the s === t
expression in the other overloaded cmp method that takes strings.
Because the methods in TripleEquals (and its siblings)override all the methods defined in
supertype TripleEqualsSupport, you can achieve the same
kind of nested tuning of equality constraints whether you mix in traits, import from companion objects, or use some combination of both.
In short, you should be able to select a primary constraint level via either a mixin or import, then change that in nested scopes however you want, again either through a mixin or import, without getting any implicit conversion ambiguity. The innermost constraint level in scope will always be in force.
Trait that defines abstract methods used to enforce compile-time type constraints for equality comparisons, and defines === and !== operators
used by matchers.
Trait that defines abstract methods used to enforce compile-time type constraints for equality comparisons, and defines === and !== operators
used by matchers.
The abstract methods of this trait are selectively implemented as implicit by subclasses to enable a spectrum of type constraints for the
=== and !== operators. As an illustration, if in the expression, a === b, the type of a
is A and b is B, the following three levels of compile-time checking can be obtained from
TripleEqualsSupport subtraits:
Unchecked - A and B can be any two types. This constraint level is available from
subtrait TripleEquals.
Statically-checked - A must be a subtype of B, or vice versa, or must cooperate such that the
equality laws stated in the equals contract are preserved.
This (intermediate) constraint level is available by using subtrait TripleEquals and installing the SuperSafe Community Edition
Scala compiler plugin.
Type-checked - A must be a subtype of B, or vice versa.
(Both A and B can be the same type, because a type is considered a subtype
of itself.)
This (strongest) constraint level is available from subtrait TypeCheckedTripleEquals.
This trait defines all methods that need to be defined implicitly by the subtraits so that if multiple subtraits are used together, the inner-most
subtrait in scope can not only enable the implicits it needs by overriding or hiding those methods (currently-in-scope as regular, non-implicit
methods) and making
them implicit, it can also disable any implicits enabled by its sibling subtraits in enclosing scopes. For example, if your test class mixes
in TypeCheckedTripleEquals, inside your test class the following methods will be implicit:
convertToCheckingEqualizertypeCheckedConstraintlowPriorityTypeCheckedConstraintconvertEquivalenceToAToBConstraintconvertEquivalenceToBToAConstraintIf in the body of a test you want to turn off the type checking, you can import the members
of TripleEquals in the body of that test. This will not only hide
non-implicit methods convertToEqualizer unconstrainedEquality of TypeCheckedTripleEquals,
replacing those with implicit ones defined in TripleEquals, it will also hide the three methods made implicit in TypeCheckedTripleEquals
(and listed above), replacing them by non-implicit ones.
In short, you should be able to select a primary constraint level via either a mixin or import, then change that in nested scopes however you want, again either through a mixin or import, without getting any implicit conversion ambiguity. The innermost constraint level in scope will always be in force.
Trait providing an implicit class that adds a toOr method to
Try, which converts Success to Good,
and Failure to Bad, as well as a validating method,
which takes one or more validation functions and returns either the
same Try if either the Try had already failed or its value
passes all the functions, or ValidationFailedException containing an error message
describing the first validation that failed.
Trait providing an implicit class that adds a toOr method to
Try, which converts Success to Good,
and Failure to Bad, as well as a validating method,
which takes one or more validation functions and returns either the
same Try if either the Try had already failed or its value
passes all the functions, or ValidationFailedException containing an error message
describing the first validation that failed.
Here's an example validation method, which passes if the given Int is evenly
divisible by 10 (i.e., the result will be Pass). If the value does not pass
this test, the result is a Fail containing a helpful error message string.
scala> import org.scalactic._
import org.scalactic._
scala> import TrySugar._
import TrySugar._
scala> import scala.util.Try
import scala.util.Try
scala> def isRound(i: Int): Validation[ErrorMessage] =
| if (i % 10 == 0) Pass else Fail(i + " was not a round number")
isRound: (i: Int)org.scalactic.Validation[org.scalactic.ErrorMessage]
Validation will be attempted on a successful Try. If the validation succeeds, the
resulting Try will be the same successful Try with the same value. (A
"validation" only transforms the Try if the validation fails, otherwise it is the
same Try. The only difference is its value has now been proven valid.)
In the following example, a successful Try[Int] with the value 100
passes the validation (which checks whether 100 is evenly divisible by 10), therefore
the result of the validating call is the same successful Try
with the same value.
scala> val try100 = Try(100) try100: scala.util.Try[Int] = Success(100) scala> val round100 = try100.validating(isRound) round100: scala.util.Try[Int] = Success(100)
If validation fails, the successful Try will be transformed into a failed one, with
a ValidationFailedException that contains the error message
returned by the validation function. In the following example, 42 fails the validation because it
is not evenly divisible by 10:
scala> val try42 = Try(42) try42: scala.util.Try[Int] = Success(42) scala> val round42 = try42.validating(isRound) round42: scala.util.Try[Int] = Failure(org.scalactic.exceptions.ValidationFailedException: 42 was not a round number)
If validating is called on a failed Try, it just returns the same failed Try:
scala> val tryEx = Try[Int] { throw new Exception("oops!") }
tryEx: scala.util.Try[Int] = Failure(java.lang.Exception: oops!)
scala> val roundEx = tryEx.validating(isRound)
roundEx: scala.util.Try[Int] = Failure(java.lang.Exception: oops!)
The validating method accepts one or more validation functions. If you
pass more than one, they will be tried in order up until the first failure, whose
error message will appear in the ValidationFailedException. In other words,
validating will short circuit at the first error and return that. It
will not accumulate errors. For example, the following validation will short circuit
after the isDivBy3 function fails:
scala> def isDivBy3(i: Int): Validation[ErrorMessage] =
| if (i % 3 == 0) Pass else Fail(i + " was not divisible by 3")
isDivBy3: (i: Int)org.scalactic.Validation[org.scalactic.ErrorMessage]
scala> def isAnswerToLifeTheUniverseAndEverything(i: Int): Validation[ErrorMessage] =
| if (i == 42) Pass else Fail(i + " did not equal 42")
isAnswerToLifeTheUniverseAndEverything: (i: Int)org.scalactic.Validation[org.scalactic.ErrorMessage]
scala> try100.validating(isRound, isDivBy3, isAnswerToLifeTheUniverseAndEverything)
res0: scala.util.Try[Int] = Failure(org.scalactic.exceptions.ValidationFailedException: 100 was not divisible by 3)
Here are some examples of the toOr method:
scala> try100.toOr res1: org.scalactic.Or[Int,Throwable] = Good(100) scala> tryEx.toOr res2: org.scalactic.Or[Int,Throwable] = Bad(java.lang.Exception: oops!)
Provides === and !== operators that return Boolean, delegate the equality determination
to an Equality type class, and require the types of the two values compared to be in a subtype/supertype
relationship.
Provides === and !== operators that return Boolean, delegate the equality determination
to an Equality type class, and require the types of the two values compared to be in a subtype/supertype
relationship.
Recommended Usage:
Trait TypeCheckedTripleEquals is useful (in both production and test code) when you need a stricter type check
than is provided by the SuperSafe Community Edition compiler plugin for
TripleEquals. For example, if you are developing a library that uses advanced
features of Scala's type system, you may want to enforce in your tests that the types appearing
in equality comparisons match exactly.
|
By default under TripleEquals, any use of === will compile, just like the == operator:
scala> import org.scalactic._ import org.scalactic._ scala> import TripleEquals._ import TripleEquals._ scala> 1L === 1 // A Long can equal an Int res0: Boolean = true scala> List(1, 2, 3) === Vector(1, 2, 3) // A List can equal a Vector res1: Boolean = true scala> "hi" === 1 // Likely a bug, because a String can never equal an Int res2: Boolean = false
With SuperSafe Community Edition installed, the first two expressions above will be allowed to compile, but the third (which represents a likely bug) will not:
scala> import org.scalactic._
import org.scalactic._
scala> import TripleEquals._
import TripleEquals._
scala> 1L === 1
res0: Boolean = true
scala> List(1, 2, 3) === Vector(1, 2, 3)
res1: Boolean = true
scala> "hi" === 1 // SuperSafe catches the bug at compile time
<console>:17: error: [Artima SuperSafe] Values of type String and Int may not be compared with
the === operator. If you really want to compare them for equality, configure Artima SuperSafe to allow
those types to be compared for equality. For more information on this kind of error, see:
http://www.artima.com/supersafe_user_guide.html#safer-equality
"hi" === 1
^
By contrast, TypeCheckedTripleEquals will prevent any of the above three expressions from compiling:
scala> import org.scalactic._
import org.scalactic._
scala> import TypeCheckedTripleEquals._
import TypeCheckedTripleEquals._
scala> 1L === 1
<console>:17: error: types Long and Int do not adhere to the type constraint selected for
the === and !== operators; the missing implicit parameter is of type org.scalactic.CanEqual[Long,Int]
1L === 1
^
scala> List(1, 2, 3) === Vector(1, 2, 3)
<console>:17: error: types List[Int] and scala.collection.immutable.Vector[Int] do not adhere
to the type constraint selected for the === and !== operators; the missing implicit parameter is
of type org.scalactic.CanEqual[List[Int],scala.collection.immutable.Vector[Int]]
List(1, 2, 3) === Vector(1, 2, 3)
^
scala> "hi" === 1
<console>:17: error: types String and Int do not adhere to the type constraint selected for
the === and !== operators; the missing implicit parameter is of type org.scalactic.CanEqual[String,Int]
"hi" === 1
^
Trait TypeCheckedTripleEquals rejects comparisons of types Int and Long, List[Int]
and Vector[Int], and String and Int, because none have a direct subtype/supertype relationship.
To compare two types that are unrelated by inheritance under TypeCheckedTripleEquals, you could
convert one of them to the other type (because a type is both a subtype and supertype of itself). Here's an example:
scala> 1L === 1.toLong // Now both sides are Long res0: Boolean = true scala> List(1, 2, 3) === Vector(1, 2, 3).toList // Now both sides are List[Int] res1: Boolean = true
Nevertheless, a better (and the recommended) way to deal with this situation is to use a widening type ascription.
A type ascription is simply a colon and a type placed next to a variable, usually surrounded by parentheses.
For example, because AnyVal is a common supertype of Int and Long,
you could solve the type error by widening the type of one side or the other to AnyVal.
Because AnyVal is a supertype of both Int and Long, the
type constraint will be satisfied:
scala> 1 === (1L: AnyVal) res2: Boolean = true scala> (1: AnyVal) === 1L res3: Boolean = true
Similarly, since Seq[Int] is a common supertype of both
Vector[Int] and List[Int], the type constraint can be
satisfied by widening either to their common supertype, Seq[Int]:
scala> List(1, 2, 3) === (Vector(1, 2, 3): Seq[Int]) res4: Boolean = true scala> (List(1, 2, 3): Seq[Int]) === Vector(1, 2, 3) res5: Boolean = true
The primary intended use case for TypeCheckedTripleEquals is to enable tests to be very strict
about which types can compared for equality, but it can also be used with production code where this level of
strictness is desired.
You can also use a type ascription to force an implicit conversion before a value participates
in an equality comparison. For example, although JavaConversions provides
an implicit conversion between java.util.Set and scala.collection.mutable.Set,
under TypeCheckedTripleEquals an equality comparison between those two types
will not be allowed:
scala> import collection.JavaConversions._
import collection.JavaConversions._
scala> import collection.mutable
import collection.mutable
scala> import TypeCheckedTripleEquals._
import TypeCheckedTripleEquals._
scala> mutable.Set.empty[String] === new java.util.HashSet[String]
<console>:36: error: types scala.collection.mutable.Set[String] and java.util.HashSet[String] do not
adhere to the type constraint selected for the === and !== operators; the missing implicit parameter
is of type org.scalactic.CanEqual[scala.collection.mutable.Set[String],java.util.HashSet[String]]
mutable.Set.empty[String] === new java.util.HashSet[String]
^
To force an implicit conversion of the Java HashSet to a Scala mutable.Set, after which the
type constraint will be satisfied, you can use a type ascription:
scala> mutable.Set.empty[String] === (new java.util.HashSet[String]: mutable.Set[String]) res0: Boolean = true
This trait will override or hide implicit methods defined by
TripleEquals
and can therefore be used to temporarily turn on or off type checking in a limited scope. Here's an example, in which TypeCheckedTripleEquals will
cause a compiler error:
import org.scalactic._ import TypeCheckedTripleEquals._ object Example { def cmp(a: Int, b: Long): Int = { if (a === b) 0 // This line won't compile else if (a < b) -1 else 1 } def cmp(s: String, t: String): Int = { if (s === t) 0 else if (s < t) -1 else 1 } }
Because Int and Long are not in a subtype/supertype relationship, comparing 1 and 1L in the context
of TypeCheckedTripleEquals will generate a compiler error:
Example.scala:9: error: types Int and Long do not adhere to the type constraint selected
for the === and !== operators; the missing implicit parameter is of
type org.scalactic.CanEqual[Int,Long]
if (a === b) 0 // This line won't compile
^
one error found
You can “relax” the type checking locally by importing
the members of TripleEquals in a limited scope:
package org.scalactic.examples.conversioncheckedtripleequals import org.scalactic._ import TypeCheckedTripleEquals._ object Example { def cmp(a: Int, b: Long): Int = { import TripleEquals._ if (a === b) 0 else if (a < b) -1 else 1 } def cmp(s: String, t: String): Int = { if (s === t) 0 else if (s < t) -1 else 1 } }
With the above change, the Example.scala file compiles fine. The strict checking is disabled only inside the first cmp method that
takes an Int and a Long. TypeCheckedTripleEquals is still enforcing its type constraint, for example, for the s === t
expression in the other overloaded cmp method that takes strings.
Because the methods TripleEquals and TypeCheckedTripleEquals
override all the methods defined in supertype TripleEqualsSupport, you can achieve the same
kind of nested tuning of equality constraints whether you mix in traits, import from companion objects, or use some combination of both.
In short, you should be able to select a primary constraint level via either a mixin or import, then change that in nested scopes however you want, again either through a mixin or import, without getting any implicit conversion ambiguity. The innermost constraint level in scope will always be in force.
Defines a custom way to normalize instances of a type that can also handle normalization of that type when passed as Any.
Defines a custom way to normalize instances of a type that can also handle normalization of that type when passed as Any.
For example, to normalize Doubles by truncating off any decimal part,
you might write:
import org.scalactic._ val truncated = new Uniformity[Double] { def normalized(d: Double) = d.floor def normalizedCanHandle(o: Any) = o.isInstanceOf[Double] def normalizedOrSame(o: Any): Any = o match { case d: Double => normalized(d) case _ => o } }
Given this definition you could use it with the Explicitly DSL like this:
import org.scalatest._ import Matchers._ 2.1 should equal (2.0) (after being truncated)
If you make the truncated val implicit and import or mix in the members of NormMethods,
you can access the behavior by invoking .norm on Doubles.
implicit val doubleUniformity = truncated import NormMethods._ val d = 2.1 d.norm // returns 2.0
Note that by creating a Uniformity rather than just an instance of its supertype, Normalization,
it can be used more generally. For example, Uniformitys allow you to the Explicitly DSL with
TripleEquals, whereas Normalizations require
TypeCheckedTripleEquals.
Uniformitys also enable you to use the Explicitly DSL with ScalaTest's should ===, equal,
and contain matcher syntax, whereas a plain Normalization can only be used with should ===, and only
under TypeCheckedTripleEquals.
the type whose uniformity is being defined
Represents the result of a validation, either the object Pass if the validation
succeeded, else an instance of Fail containing an error value describing the validation failure.
Represents the result of a validation, either the object Pass if the validation
succeeded, else an instance of Fail containing an error value describing the validation failure.
Validations are used to filter Ors in for expressions or filter method calls.
For example, consider these methods:
import org.scalactic._ def isRound(i: Int): Validation[ErrorMessage] = if (i % 10 == 0) Pass else Fail(i + " was not a round number") def isDivBy3(i: Int): Validation[ErrorMessage] = if (i % 3 == 0) Pass else Fail(i + " was not divisible by 3")
Because isRound and isDivBy3 take an Int and return a Validation[ErrorMessage], you
can use them in filters in for expressions involving Ors of type Int Or ErrorMessage.
Here's an example:
for (i <- Good(3) if isRound(i) && isDivBy3(i)) yield i // Result: Bad(3 was not a round number)
Validations can also be used to accumulate error using when, a method that's made available by trait Accumulation on
accumualting Ors (Ors whose Bad type is an Every[T]). Here are some examples:
import Accumulation._ for (i <- Good(3) when (isRound, isDivBy3)) yield i // Result: Bad(One(3 was not a round number)) for (i <- Good(4) when (isRound, isDivBy3)) yield i // Result: Bad(Many(4 was not a round number, 4 was not divisible by 3))
Note: You can think of Validation as an “Option with attitude,” where Pass is
a None that indicates validation success and Fail is a Some whose value describes
the validation failure.
the type of error value describing a validation failure for this Validation
Constraint has been deprecated and will be removed in a future version of Scalactic. Please use its new name, CanEqual, instead.
Trait ConversionCheckedTripleEquals has been deprecated and will be removed in a future version of Scalactic. Please use TypeCheckedTripleEquals with a type annotation instead.
Trait ConversionCheckedTripleEquals has been deprecated and will be removed in a future version of Scalactic. Please use TypeCheckedTripleEquals with a type annotation instead.
Trait ConversionCheckedTripleEquals has been deprecated because code that uses it can break if you
change the equality policy to TripleEquals. For example, because JavaConversions provides
an implicit conversion between java.util.Set and scala.collection.mutable.Set,
an equality comparison under ConversionCheckedTripleEquals can yield true:
scala> import collection.JavaConversions._ import collection.JavaConversions._ scala> import collection.mutable import collection.mutable scala> import ConversionCheckedTripleEquals._ import ConversionCheckedTripleEquals._ scala> mutable.Set.empty[String] === new java.util.HashSet[String] res0: Boolean = true
If code written under ConversionCheckedTripleEquals is left unchanged, but the policy
is changed to TripleEquals, the equality comparison will now yield false:
scala> import TripleEquals._ import TripleEquals._ scala> mutable.Set.empty[String] === (new java.util.HashSet[String]) res1: Boolean = false
The above change from true to false happens without any warning
or complaint from the compiler. Thus it is quite error prone. A better way to achieve equality
comparisons after an implicit conversion is to do so explicitly, by forcing
the implicit conversion via a type annotation (following an expression with a colon and
the desired type). Here's an example:
scala> mutable.Set.empty[String] === (new java.util.HashSet[String]: mutable.Set[String]) res3: Boolean = true
To get rid of the deprecation warning, you can use TypeCheckedTripleEquals instead of
ConversionCheckedTripleEquals, and add explicit type annotations where needed:
scala> import TypeCheckedTripleEquals._
import TypeCheckedTripleEquals._
scala> mutable.Set.empty[String] === new java.util.HashSet[String]
<console>:27: error: types scala.collection.mutable.Set[String] and java.util.HashSet[String] do not adhere to the type constraint selected for the === and !== operators; the missing implicit parameter is of type org.scalactic.CanEqual[scala.collection.mutable.Set[String],java.util.HashSet[String]]
mutable.Set.empty[String] === (new java.util.HashSet[String])
^
scala> mutable.Set.empty[String] === (new java.util.HashSet[String]: mutable.Set[String])
res4: Boolean = true
ConversionCheckedTripleEquals has been deprecated and will be removed in a future version of Scalactic. Please use TypeCheckedTripleEquals with a type annotation instead
This trait is the 2.2.6 PrettyMethods trait renamed to DeprecatedPrettyMethods. It is
a quick way to get old code working again that defined an implicit PrettifierConfig, but
before the deprecation cycle is over please change the implicit PrettifierConfig to
an implicit Prettifier.
Provides an implicit conversion that enables pretty to be invoked on any
object, to transform that object into a String representation.
This trait is the 2.2.6 PrettyMethods trait renamed to DeprecatedPrettyMethods. It is
a quick way to get old code working again that defined an implicit PrettifierConfig, but
before the deprecation cycle is over please change the implicit PrettifierConfig to
an implicit Prettifier.
Provides an implicit conversion that enables pretty to be invoked on any
object, to transform that object into a String representation.
Please use PrettyMethods instead.
Provides an implicit conversion that will be applied only if a higher-priority implicit conversion declared a subtrait is not applicable.
Provides an implicit conversion that will be applied only if a higher-priority implicit conversion declared a subtrait is not applicable.
This trait, which supports ConversionCheckedTripleEquals, will no longer be necessary once the deprecation cycle for ConversionCheckedTripleEquals
has completed. At that time it will be removed.
The purpose of this trait is to make the === operator symetric. In other words, a === invocation
will be allowed if an implicit conversion exists in either direction. For example, the implicit widening conversion from
Int to Long will be applied on the left hand side in this expression:
1 === 1L
But in the next expression, it will be applied on the right hand side:
1L === 1
The first expression above is enabled by the implicit conversion conversionCheckedConstraint in trait
ConversionCheckedTripleEquals.
The second expression above is
enabled by the implicit conversion lowPriorityConversionCheckedConstraint in this trait.
The reason these two implicit methods aren't both declared in the subtraits is that if implicit conversions were available in both directions, they would conflict. By placing one of them in this supertrait, the higher priority conversion will be selected.
Trait LowPriorityConversionCheckedConstraint is deprecated and will be removed after the deprecation period of ConversionCheckedTripleEquals has completed.
Companion object to trait Accumulation that allows Accumulation's members to be imported
rather than mixed in, and also contains nested traits used by implicit conversions declared in
trait Accumulations.
Companion object to trait Accumulation that allows Accumulation's members to be imported
rather than mixed in, and also contains nested traits used by implicit conversions declared in
trait Accumulations.
For more information and examples, see the Accumulating errors with Or section
of the main documentation for class Or.
Bool companion object that provides factory methods to create different sub types of Bool
Bool companion object that provides factory methods to create different sub types of Bool
Bool is used by code generated from BooleanMacro (which AssertionsMacro and RequirementsMacro uses),
it needs to be public so that the generated code can be compiled. It is expected that ScalaTest users would ever need to use Bool directly.
Companion object for Catcher that provides a factory method for creating Throwable extractors.
Companion object for Catcher that provides a factory method for creating Throwable extractors.
Companion object for class Chain.
Companion object for class Chain.
Object that can be used as an endpoint for Chain construction expressions
that use the cons (::) operator.
Object that can be used as an endpoint for Chain construction expressions
that use the cons (::) operator.
Here's an example:
scala> 1 :: 2 :: 3 :: End res0: org.scalactic.Chain[Int] = Chain(1, 2, 3)
Note that unlike Nil, which is an instance of List[Nothing],
End is not an instance of Chain[Nothing], because there is
no empty Chain:
scala> Nil.isInstanceOf[List[_]] res0: Boolean = true scala> End.isInstanceOf[Chain[_]] res1: Boolean = false
Companion object for trait Equality that provides factory methods for producing Equality
instances.
Companion object for trait Equality that provides factory methods for producing Equality
instances.
Companion object for trait Equivalence that provides a factory method for producing
default Equivalence instances.
Companion object for trait Equivalence that provides a factory method for producing
default Equivalence instances.
Companion object for abstract class Every.
Companion object for abstract class Every.
Companion object for Explicitly, which enables the Scalactic explicitly DSL to
be imported rather than mixed in, like this:
Companion object for Explicitly, which enables the Scalactic explicitly DSL to
be imported rather than mixed in, like this:
import org.scalactic._ import Explicitly._ // Use the explicitly DSL...
Companion object for FutureSugar enabling its members to be
imported as an alternative to mixing them in.
Companion object for FutureSugar enabling its members to be
imported as an alternative to mixing them in.
Companion object for Good that offers, in addition to the standard factory method
for Good that takes single “good” type, an parameterless apply
used to narrow the Good type when creating a Bad.
Companion object for Good that offers, in addition to the standard factory method
for Good that takes single “good” type, an parameterless apply
used to narrow the Good type when creating a Bad.
Companion object that facilitates the importing of MapEqualityConstraints members as
an alternative to mixing it in.
Companion object that facilitates the importing of MapEqualityConstraints members as
an alternative to mixing it in. One use case is to import MapEqualityConstraints members so you can use
them in the Scala interpreter.
Companion object for NormMethods enabling its members to be imported as an alternative to mixing them in.
Companion object for NormMethods enabling its members to be imported as an alternative to mixing them in.
Companion object for OptionSugar enabling its members to be
imported as an alternative to mixing them in.
Companion object for OptionSugar enabling its members to be
imported as an alternative to mixing them in.
The companion object for Or providing factory methods for creating Ors from Eithers and Trys.
The companion object for Or providing factory methods for creating Ors from Eithers and Trys.
Indicates a validation succeeded.
Companion object for Prettifier that provides a default Prettifier implementation.
Companion object for Prettifier that provides a default Prettifier implementation.
Companion object for trait PrettyMethods enabling its members to be imported as an
alternative to mixing them in.
Companion object for trait PrettyMethods enabling its members to be imported as an
alternative to mixing them in.
Companion object that facilitates the importing of Requirements members as
an alternative to mixing it in.
Companion object that facilitates the importing of Requirements members as
an alternative to mixing it in. One use case is to import Requirements members so you can use
them in the Scala interpreter:
$scala -classpath scalatest.jar
Welcome to Scala version 2.10.3.final (Java HotSpot(TM) Client VM, Java xxxxxx).
Type in expressions to have them evaluated.
Type :help for more information.
scala> import org.scalactic.Requirements._
import org.scalactic.Requirements._
scala> val a = 1
a: Int = 1
scala> require(a == 2)
java.lang.IllegalArgumentException: 1 did not equal 2
at org.scalactic.Requirements$RequirementsHelper.macroRequire(Requirements.scala:56)
at .<init>(<console>:20)
at .<clinit>(<console>)
at .<init>(<console>:7)
at .<clinit>(<console>)
at $print(<console>)
at sun.reflect.NativeMethodAccessorImpl.invoke...
The version number of Scalactic.
The version number of Scalactic.
the Scalactic version number.
Companion object that facilitates the importing of SeqEqualityConstraints members as
an alternative to mixing it in.
Companion object that facilitates the importing of SeqEqualityConstraints members as
an alternative to mixing it in. One use case is to import SeqEqualityConstraints members so you can use
them in the Scala interpreter.
Companion object that facilitates the importing of SetEqualityConstraints members as
an alternative to mixing it in.
Companion object that facilitates the importing of SetEqualityConstraints members as
an alternative to mixing it in. One use case is to import SetEqualityConstraints members so you can use
them in the Scala interpreter.
Companion object that facilitates the importing of Snapshots members as
an alternative to mixing it in.
Companion object that facilitates the importing of Snapshots members as
an alternative to mixing it in. One use case is to import Snapshots members so you can use
them in the Scala interpreter:
$scala -classpath scalatest.jar Welcome to Scala version 2.10.3.final (Java HotSpot(TM) Client VM, Java xxxxxx). Type in expressions to have them evaluated. Type :help for more information. scala> import org.scalactic.Snapshots._ import org.scalatest.Snapshots._ scala> val a = 8 a: Int = 8 scala> snap(a) res0: scala.collection.immutable.Vector[org.scalactic.Snapshot] = Vector(a = 8)
Companion object to trait StringNormalizations that provides an
alternative to mixing it in.
Companion object to trait StringNormalizations that provides an
alternative to mixing it in.
Companion object that facilitates the importing of TimesOnInt members as an alternative to mixing it in.
Companion object that facilitates the importing of TimesOnInt members as an alternative to mixing it in.
One use case of this companion object is to import TimesOnInt members so you can use them in the Scala interpreter.
Here's an example:
scala> import org.scalatest.TimesOnInt._
import org.scalatest.TimesOnInt._
scala> 3 times println("Hello again, world!")
Hello again, world!
Hello again, world!
Hello again, world!
Companion object to trait Tolerance that facilitates the importing of Tolerance members as
an alternative to mixing it in.
Companion object to trait Tolerance that facilitates the importing of Tolerance members as
an alternative to mixing it in. One use case is to import Tolerance members so you can use
them in the Scala interpreter:
$ scala -classpath scalactic.jar Welcome to Scala version 2.10.0 Type in expressions to have them evaluated. Type :help for more information. scala> import org.scalactic._ import org.scalactic._ scala> import Tolerance._ import Tolerance._ scala> 1.0 +- 0.1 res0: org.scalactic.TripleEqualsSupport.Spread[Double] = Spread(1.0,0.1)
Companion object for TolerantNumerics that enables its members to be imported as an alternative to
mixing them in.
Companion object for TolerantNumerics that enables its members to be imported as an alternative to
mixing them in.
Companion object that facilitates the importing of TraversableEqualityConstraints members as
an alternative to mixing it in.
Companion object that facilitates the importing of TraversableEqualityConstraints members as
an alternative to mixing it in. One use case is to import TraversableEqualityConstraints members so you can use
them in the Scala interpreter.
Companion object to trait TripleEquals that facilitates the importing of TripleEquals members as
an alternative to mixing it in.
Companion object to trait TripleEquals that facilitates the importing of TripleEquals members as
an alternative to mixing it in. One use case is to import TripleEquals members so you can use
them in the Scala interpreter:
$ scala -classpath scalatest.jar Welcome to Scala version 2.10.0 Type in expressions to have them evaluated. Type :help for more information. scala> import org.scalactic._ import org.scalactic._ scala> import TripleEquals._ import TripleEquals._ scala> 1 + 1 === 2 res0: Boolean = true
Companion object for TrySugar enabling its members to be
imported as an alternative to mixing them in.
Companion object for TrySugar enabling its members to be
imported as an alternative to mixing them in.
Companion object to trait TypeCheckedTripleEquals that facilitates the importing of TypeCheckedTripleEquals members as
an alternative to mixing it in.
Companion object to trait TypeCheckedTripleEquals that facilitates the importing of TypeCheckedTripleEquals members as
an alternative to mixing it in. One use case is to import TypeCheckedTripleEquals members so you can use
them in the Scala interpreter:
$ scala -classpath scalatest.jar Welcome to Scala version 2.10.0 Type in expressions to have them evaluated. Type :help for more information. scala> import org.scalactic._ import org.scalactic._ scala> import TypeCheckedTripleEquals._ import TypeCheckedTripleEquals._ scala> 1 + 1 === 2 res0: Boolean = true
Returns the result of evaluating the given block f, wrapped in a Good, or
if an exception is thrown, the Throwable, wrapped in a Bad.
Returns the result of evaluating the given block f, wrapped in a Good, or
if an exception is thrown, the Throwable, wrapped in a Bad.
Here are some examples:
scala> import org.scalactic._
import org.scalactic._
scala> attempt { 2 / 1 }
res0: org.scalactic.Or[Int,Throwable] = Good(2)
scala> attempt { 2 / 0 }
res1: org.scalactic.Or[Int,Throwable] = Bad(java.lang.ArithmeticException: / by zero)
the block to attempt to evaluate
the result of evaluating the block, wrapped in a Good, or the
thrown exception, wrapped in a Bad
Object ConversionCheckedTripleEquals has been deprecated and will be removed in a future version of Scalactic. Please use TypeCheckedTripleEquals with a type annotation instead.
Object ConversionCheckedTripleEquals has been deprecated and will be removed in a future version of Scalactic. Please use TypeCheckedTripleEquals with a type annotation instead.
For more information and examples, please see the documentation for the ConversionCheckedTripleEqals companion trait.
ConversionCheckedTripleEquals has been deprecated and will be removed in a future version of Scalactic. Please use TypeCheckedTripleEquals with a type annotation instead
This object is the 2.2.6 PrettyMethods object renamed to DeprecatedPrettyMethods. Please change DeprecatedPrettyMethods to PrettyMethods, as DeprecatedPrettyMethods is deprecated and will be removed in a future version of ScalaTest.
This object is the 2.2.6 PrettyMethods object renamed to DeprecatedPrettyMethods. Please change DeprecatedPrettyMethods to PrettyMethods, as DeprecatedPrettyMethods is deprecated and will be removed in a future version of ScalaTest.
Please use PrettyMethods instead.